Catseyes ??? where??

[tonynw]

I have spaniel on my box but where do i find catseyes and how do i install it ??

cheers

tonynw

[andy91]

Try clicking on the link on the usal thread post 7 i tried to help you on mate if not its in red stickies above,

Andy.

[tonynw]

Try clicking on the link on the usal thread post 7 i tried to help you on mate if not its in red stickies above,

Andy.

i have been there and read it time and time again but where do you download it from or how via tspanel

tonynw

[andy91]

i have been there and read it time and time again but where do you download it from or how via tspanel

tonynw

Download from post 35

http://www.digital-kaos.co.uk/forums...47/index3.html

Did the long and lay work u aint said?

Andy.

[southpaw]

I couldn't see it myself on tspanel, so I used sgtflipflops multi sat settings from it

[tonynw]

I couldn't see it myself on tspanel, so I used sgtflipflops multi sat settings from it

i can't download from the post as i have a mac and can't unzip the file and even if could i wouldn't know what to do with it, so where do i down load sgtflipflops from on tspanel.

thanks

tonynw

[tonynw]

Download from post 35

http://www.digital-kaos.co.uk/forums...47/index3.html

Did the long and lay work u aint said?

Andy.

the long and lat were the same as i have been on this now for 4 days think i might give up as a bad job and sell the box getting a bit silly this i don't have a clue what position the dish is in 22e or 35w ?????? if i plug my old fortecstar box back in it just works.

tonynw

[andy91]

the long and lat were the same as i have been on this now for 4 days think i might give up as a bad job and sell the box getting a bit silly this i don't have a clue what position the dish is in 22e or 35w ?????? if i plug my old fortecstar box back in it just works.

tonynw

I wouldnt have thought its the box,but i cant see what you have put in.
If you copied the simple method with positioner as mode and your long and lat it should work.
All i know is what ive been telling you which is correct.
Would help if you had a laptop with windows or even desktop pc and ethernet lead you can do the bouquets then.
Good luck with it,

Andy.

[tonynw]

I wouldnt have thought its the box,but i cant see what you have put in.
If you copied the simple method with positioner as mode and your long and lat it should work.
All i know is what ive been telling you which is correct.
Would help if you had a laptop with windows or even desktop pc and ethernet lead you can do the bouquets then.
Good luck with it,

Andy.

1 last go i will go and buy a cheap netbook tomorrow, so can you tell me how and what i have to do when i have down loaded the file, and if that don't work then i will give up on the thing and stick it on ebay.


tonynw

[andy91]

1 last go i will go and buy a cheap netbook tomorrow, so can you tell me how and what i have to do when i have down loaded the file, and if that don't work then i will give up on the thing and stick it on ebay.


tonynw

Surely you must know someone with a lappy?
Follow the dreambox edit guide its dead easy just open the catseyes folder onto the desktop.
If possible take a picture of your tuner configuration.
Must be something not quite right.
Suppose it could be a faulty tuner so you could check its seated correctly.
Andy.

[tonynw]

i have an old fixed dish at 19.2 and i can set it up on there and it works no problem

i see southpaw lives merseyside i am in preston might see if i take it to him if he can set it up for me for a fee. or see if there is any one nearer to me.

tonynw

[andy91]

Either that or get someone to talk you through it on phone or msn messenger but if you're doing everything we are telling you theres a problem with the box.
Didnt know you couldnt unrar a file with a mac.

Andy.

[RuberDuck]

if your using a mac use idreamx there is no need to use windows.

http://www.macupdate.com/app/mac/24263/idreamx

as for not being unable to unrar on a mac.

http://www.rarlab.com/download.htm

or

http://www.unrarx.com/

it really amazes me that some people cant or wont just use google

[tonynw]

if your using a mac use idreamx there is no need to use windows.

http://www.macupdate.com/app/mac/24263/idreamx

as for not being unable to unrar on a mac.

http://www.rarlab.com/download.htm

or

http://www.unrarx.com/

it really amazes me that some people cant or wont just use google

All links not supported.


tonynw

[westkill]

what you mean not suported ?
copy n paste links in webrowser