VAG-COM/VCDS LATEST DUMPS

**alldecode** · 31st March, 2013, 09:29 PM

did you have maybe 11.11.3 dump to try reflesh atmega (i have 11.11)

**mattydr67** · 31st March, 2013, 11:07 PM

Mate
I have of course but dumps aren't for share
Sorry
Good luck

P.S. - the last free dump you can find it is for VCDS 11.11.0
If you have a RL tool you need a loader too

**alldecode** · 1st April, 2013, 02:07 PM

I have dump 11.11, and tomorrow try tu upload to atmega, then change fireware with vcds. Maybe sucess

what you mean: If you have a RL tool you need a loader too

**mattydr67** · 1st April, 2013, 03:30 PM

VCDS are with FTDI BL/BM or with FTDI RL
Fot the tool with FTDI BL/BM you don't need loader, for the tool with FTDI RL you need loader
Good luck

**alldecode** · 1st April, 2013, 03:41 PM

OK, loader

i try to conect with car, and OK, but if i try to coding, error mesage... not registred ... on CD not find loader, do you have?

I buy many VCDS from china, and never use loader, why loader must use?

**mattydr67** · 1st April, 2013, 07:53 PM

The tools with RL from China use their softwear for that tool.
Loader including or it is made in other way.
The loader it used when you use let's say VCDS 11.11.0 with original softwear but for the tool with RL ( becasue the dump in VCDS 11.11.0 it is for tools with FTDI BL/BM and no FTDI ID - FTDI RL has an ID so the loader will pass it )
Good luck

P.S> - your tool need to be reflashed

**betonel** · 2nd May, 2014, 01:16 PM

Tested VCDS 11.11.0 dump

hex files are for pony prog, bin files for upa.

Here you can find dump (Atmega flash+eeprom)

Use VCDS 11.11.0 loader if you have a RL interface. Remove rar extension from filepart of VCDS software.

When programming, keep in mind correct order:

1. CHIP ERASE
2. FLASH
3. EPROM
4. FUSE BITS
5. LOCK BITS

VCDS v11.11 ATMEGA162 Fuses & Lock bits
---------------------------------------

# LOCK: 0b11111100
# bit 7 = -
# bit 6 = -
# bit 5 = BLB12 (1)
# bit 4 = BLB11 (1)
# bit 3 = BLB02 (1)
# bit 2 = BLB01 (1)
# bit 1 = LB2 (0)
# bit 0 = LB1 (0)

# EFUSE: 0b11111001
# bit 7 = -
# bit 6 = -
# bit 5 = -
# bit 4 = M161C (1)
# bit 3 = BODLEVEL2 (1)
# bit 2 = BODLEVEL1 (0)
# bit 1 = BODLEVEL0 (0)
# bit 0 = -

# LFUSE: 0b11111101
# bit 7 = CKDIV8 (1)
# bit 6 = CKOUT (1)
# bit 5..4 = SUT1:0 (11)
# bit 3..0 = CKSEL3:0 (1101)

# HFUSE: 0b11011100
# bit 7 = OCDEN (1)
# bit 6 = JTAGEN (1)
# bit 5 = SPIEN (0)
# bit 4 = WDTON (1)
# bit 3 = EESAVE (1)
# bit 2 = BOOTSZ1 (1)
# bit 1 = BOOTSZ0 (0)
# bit 0 = BOOTRST (0)

**damian475** · 4th May, 2014, 11:59 AM

Have someone some neewest flash and ee for 11.11.3 pl? i have 10.5.5 but looking for somethink new.

**eliotroyano** · 9th May, 2014, 07:55 PM

Originally Posted by betonel

Tested VCDS 11.11.0 dump

hex files are for pony prog, bin files for upa.

Here you can find dump (Atmega flash+eeprom)

Use VCDS 11.11.0 loader if you have a RL interface. Remove rar extension from filepart of VCDS software.

When programming, keep in mind correct order:

1. CHIP ERASE
2. FLASH
3. EPROM
4. FUSE BITS
5. LOCK BITS

VCDS v11.11 ATMEGA162 Fuses & Lock bits
---------------------------------------

# LOCK: 0b11111100
# bit 7 = -
# bit 6 = -
# bit 5 = BLB12 (1)
# bit 4 = BLB11 (1)
# bit 3 = BLB02 (1)
# bit 2 = BLB01 (1)
# bit 1 = LB2 (0)
# bit 0 = LB1 (0)

# EFUSE: 0b11111001
# bit 7 = -
# bit 6 = -
# bit 5 = -
# bit 4 = M161C (1)
# bit 3 = BODLEVEL2 (1)
# bit 2 = BODLEVEL1 (0)
# bit 1 = BODLEVEL0 (0)
# bit 0 = -

# LFUSE: 0b11111101
# bit 7 = CKDIV8 (1)
# bit 6 = CKOUT (1)
# bit 5..4 = SUT1:0 (11)
# bit 3..0 = CKSEL3:0 (1101)

# HFUSE: 0b11011100
# bit 7 = OCDEN (1)
# bit 6 = JTAGEN (1)
# bit 5 = SPIEN (0)
# bit 4 = WDTON (1)
# bit 3 = EESAVE (1)
# bit 2 = BOOTSZ1 (1)
# bit 1 = BOOTSZ0 (0)
# bit 0 = BOOTRST (0)

Betonel can you check fuse & lock bits because I have seen others in the past. Please check out attachment.Fuse Bits & Locks.jpg

**eliotroyano** · 5th June, 2014, 01:39 PM

Originally Posted by eliotroyano

Betonel can you check fuse & lock bits because I have seen others in the past. Please check out attachment.Fuse Bits & Locks.jpg

Anyone can confirm the fuse & lock bits posted for VCDS 11.11.0?

**Marecki** · 9th January, 2015, 11:05 PM

Originally Posted by betonel

Tested VCDS 11.11.0 dump

hex files are for pony prog, bin files for upa.

Here you can find dump (Atmega flash+eeprom)

Use VCDS 11.11.0 loader if you have a RL interface. Remove rar extension from filepart of VCDS software.

When programming, keep in mind correct order:

1. CHIP ERASE
2. FLASH
3. EPROM
4. FUSE BITS
5. LOCK BITS

VCDS v11.11 ATMEGA162 Fuses & Lock bits
---------------------------------------

# LOCK: 0b11111100
# bit 7 = -
# bit 6 = -
# bit 5 = BLB12 (1)
# bit 4 = BLB11 (1)
# bit 3 = BLB02 (1)
# bit 2 = BLB01 (1)
# bit 1 = LB2 (0)
# bit 0 = LB1 (0)

# EFUSE: 0b11111001
# bit 7 = -
# bit 6 = -
# bit 5 = -
# bit 4 = M161C (1)
# bit 3 = BODLEVEL2 (1)
# bit 2 = BODLEVEL1 (0)
# bit 1 = BODLEVEL0 (0)
# bit 0 = -

# LFUSE: 0b11111101
# bit 7 = CKDIV8 (1)
# bit 6 = CKOUT (1)
# bit 5..4 = SUT1:0 (11)
# bit 3..0 = CKSEL3:0 (1101)

# HFUSE: 0b11011100
# bit 7 = OCDEN (1)
# bit 6 = JTAGEN (1)
# bit 5 = SPIEN (0)
# bit 4 = WDTON (1)
# bit 3 = EESAVE (1)
# bit 2 = BOOTSZ1 (1)
# bit 1 = BOOTSZ0 (0)
# bit 0 = BOOTRST (0)

zip archives damaged

**dimet** · 18th January, 2015, 06:34 PM

Originally Posted by betonel

Tested VCDS 11.11.0 dump

hex files are for pony prog, bin files for upa.

Here you can find dump (Atmega flash+eeprom)

Use VCDS 11.11.0 loader if you have a RL interface. Remove rar extension from filepart of VCDS software.

When programming, keep in mind correct order:

1. CHIP ERASE
2. FLASH
3. EPROM
4. FUSE BITS
5. LOCK BITS

VCDS v11.11 ATMEGA162 Fuses & Lock bits
---------------------------------------

# LOCK: 0b11111100
# bit 7 = -
# bit 6 = -
# bit 5 = BLB12 (1)
# bit 4 = BLB11 (1)
# bit 3 = BLB02 (1)
# bit 2 = BLB01 (1)
# bit 1 = LB2 (0)
# bit 0 = LB1 (0)

# EFUSE: 0b11111001
# bit 7 = -
# bit 6 = -
# bit 5 = -
# bit 4 = M161C (1)
# bit 3 = BODLEVEL2 (1)
# bit 2 = BODLEVEL1 (0)
# bit 1 = BODLEVEL0 (0)
# bit 0 = -

# LFUSE: 0b11111101
# bit 7 = CKDIV8 (1)
# bit 6 = CKOUT (1)
# bit 5..4 = SUT1:0 (11)
# bit 3..0 = CKSEL3:0 (1101)

# HFUSE: 0b11011100
# bit 7 = OCDEN (1)
# bit 6 = JTAGEN (1)
# bit 5 = SPIEN (0)
# bit 4 = WDTON (1)
# bit 3 = EESAVE (1)
# bit 2 = BOOTSZ1 (1)
# bit 1 = BOOTSZ0 (0)
# bit 0 = BOOTRST (0)

Please update damaged archives

**simaservis1108** · 20th January, 2015, 11:21 AM

Since my VCDS was bricked,I used above dump 11.11.0.
Interface is alive now,but when I connect to CAN,I can work 10 seconds,then I am disconnected,and have to unplug/replug USB and restart VCDS.

Is there any solution to this?

**kidloco** · 24th January, 2015, 11:11 PM

Hello to all i have a vcds interface 12.10 clone with beta sw. is there any version of vcds original software that can be used on this interface..Thank you

**PhoenixRSC** · 26th January, 2015, 06:30 AM

Hello kidloco,

With VCDS chinese clone interface, you must only use the install executable that come with interface on CD-ROM.
There is a risk to block the interface if you try an another install executable.

Thread: VAG-COM/VCDS LATEST DUMPS

Thread Tools

Display

The Following 20 Users Say Thank You to betonel For This Useful Post:

Bookmarks

Bookmarks

Posting Permissions