Neek2o Setup and installation guide

[peterp13]

Not trying to argue or anything, but just for your info that one of the u drive I tried is Kingston 8G datatraveler G3, which seems to be reported as compatible with wii. USB Devices Compatibility List - WikiTemp

So I really am out of ideas of what I did wrong.

[blacky1973]

Here you go peter MEGAUPLOAD - The leading online storage and file delivery service this is a 4.3u nand with green theme all channels added and working neek2o setup. Remove all traces of neek2o and sneek from your wii, sd and hdd, then install these files to their relevant places. Start hbc then launch mmm. Reload to ios236 or ios249 then go to wad manager and install neek2o wad. If neek2o doesn't launch with this setup it is your usb pen drive that is not compatible

hi could you possibly re-upload the file as its stating its unavalible, thanks

[happy_highlander]

hi could you possibly re-upload the file as its stating its unavalible, thanks

Try it again it's working for me just downloaded it as a guest

[happy_highlander]

Not trying to argue or anything, but just for your info that one of the u drive I tried is Kingston 8G datatraveler G3, which seems to be reported as compatible with wii. USB Devices Compatibility List - WikiTemp

So I really am out of ideas of what I did wrong.

It is compatible with the wii but may not be compatible with neek2o. It can be quite picky due to the fact that it runs it's checks very quickly so if the drive does not spin up fast enough or in your case have a fast enough read speed, neek2o can be finished it's checks for a nand and files before the drive had given it access, if you must use that drive there is a workaround but it means using so hex editor write a new command line in neek2o tho delay the start up of the program to allow for three drive to catch up

[peterp13]

Thanks, HH.

I will find other USB drive to try. At the same time, could you please point me to where I cound find info about delaying the neek2o start up?

Much appreciated.

[peterp13]

It is compatible with the wii but may not be compatible with neek2o. It can be quite picky due to the fact that it runs it's checks very quickly so if the drive does not spin up fast enough or in your case have a fast enough read speed, neek2o can be finished it's checks for a nand and files before the drive had given it access, if you must use that drive there is a workaround but it means using so hex editor write a new command line in neek2o tho delay the start up of the program to allow for three drive to catch up

Many thanks to Happy_Highlander.

I finally passed the neek2o installation, it's all due to the HDD. Folks, try to use real HD instead of flash drive as the HD seems to be up for the task more.

Though, I now have problem playing games, games creah in Joyflow, any idea on how that could be resolved?

[peterp13]

After installing neek2o, I tried playing tintin, but seems to still freeze at checkpoints like previously when using usb loader, any idea why?

Also, the game play seems to have hipcup/slow_motion, I wonder if Joyflow is slow in loading up the HD.

[slipx]

It is compatible with the wii but may not be compatible with neek2o. It can be quite picky due to the fact that it runs it's checks very quickly so if the drive does not spin up fast enough or in your case have a fast enough read speed, neek2o can be finished it's checks for a nand and files before the drive had given it access, if you must use that drive there is a workaround but it means using so hex editor write a new command line in neek2o tho delay the start up of the program to allow for three drive to catch up

Hi HH

Been battling with neek2o for ages now and suspect its because the HD is not spinning up fast enough. Glad I found this forum. Please can you share how I can edit the file to delay the start of the program.

Thanks

[happy_highlander]

Thanks, HH.

I will find other USB drive to try. At the same time, could you please point me to where I cound find info about delaying the neek2o start up?

Much appreciated.

I certainly can mate check your pm

[blacky1973]

hi, hoping you could help me,
ive followed your guide but i am unable to get anything to work,

i have the neek2o on my home screen but 9 times out of 10 when i try to load/open it, it fails and im left with a black screen. on the odd occasion it does open i go to joyflow to play games direct from hdd i get a message saying "not a wii or gc disc/game"

am i doing something wrong, if so what?

my wii firmware is 4.1e

thanks.

[happy_highlander]

hi, hoping you could help me,
ive followed your guide but i am unable to get anything to work,

i have the neek2o on my home screen but 9 times out of 10 when i try to load/open it, it fails and im left with a black screen. on the odd occasion it does open i go to joyflow to play games direct from hdd i get a message saying "not a wii or gc disc/game"

am i doing something wrong, if so what?

my wii firmware is 4.1e

thanks.

Yes you are doing something very wrong. If you are trying to use the file that you say isn't working then that was a build made for an american wii. Have you followed the guide from the very beginning and followed all instructions to the letter. Every step on the guide is very important as is the format details and file structure.

[blacky1973]

Yes you are doing something very wrong. If you are trying to use the file that you say isn't working then that was a build made for an american wii. Have you followed the guide from the very beginning and followed all instructions to the letter. Every step on the guide is very important as is the format details and file structure.

hi, no im not using that file, im doing as the guide says to the letter but as i say im getting the black screen or the "not a wii or gc disc" message.

thanks you

[happy_highlander]

hi, no im not using that file, im doing as the guide says to the letter but as i say im getting the black screen or the "not a wii or gc disc" message.

thanks you

Last person that had that problem had not formatted hdd to fat32 with 32kb clusters which is very important

[blacky1973]

hi all i did was follow the guide, i already had wbfs games on hdd so used the wbfs2fat converter that you included in your guide, but still having problems.

[happy_highlander]

hi all i did was follow the guide, i already had wbfs games on hdd so used the wbfs2fat converter that you included in your guide, but still having problems.

Can you post the list of files modmii downloaded for you for both sd and usb but the fact that it works sometimes indicates that the hdd is not spinning up fast enough all the time and instead of using joyflow to launch games (it is just and add on) when in the main screen of neek2o press 1 on the wiimote this will bring up the list of games on the hdd select the game you want from that list and it will show up in the disc channel now launch it from the disc channel.....This is how to run the games in full sneek and is the most compatible as you aren't using another go between (joyflow) but if in doubt run modmii again and download a full new set up and try that. Sometimes modmii throws out a bad file transfer. It is still very new.