peugeot 207 2011

[andersonmaxi]

hello guys
i have problem with this car
car peueot 207. 2011 would not start just after washing
i chek all fusib bsi and bcm
all good
where is problem ???
thx u

[andersonmaxi]

P2000 shows no contact with bsi and ecu or bcm
bat central door work fine
thx

[andersonmaxi]

207 diesel will not start and the starter not start .. so just
contact work

[ammarben]

j'ai eu le meme cas
change le BSM

[andersonmaxi]

thx u but central door work fine

[benzerrouki]

If you don't have starter(response) then change the BSM

else check +12V between ABS and ecu

[andersonmaxi]

thx u
can u tell me moor abt 12V between ABS and ecu ???
MEAN LOCATION EXACT
THX U

[slovenija]

yes change BSM I HAVE A SAME PROBLEM WITH CITROEN C3 .

[leandroks]

Have a look on the engine ecu it is very commun get wet after washing...

[Sarkan]

A similar problem.Peugeot 207 1.4HDI 2008year.Engine code 8HZ ECU EDC16C34.
PP2000 communicates with all devices but not with ECU.Starter does not work.Only pin c3 on connector C have power.A1 pin on connector C and m2 pin on conector
B no power,where it should be.Everything else works on the car, so I dismissed the suspicion of BSI.I doubt the BSM in the engine compartment.Unfortunately sealed in hard plastic.
Does anyone have the same experience.