install solution Xentry 11.2011 OK

[rocris]

Hi,
after i installed 11/2011 i saw that tab "information" is missing ;is anybody which has same problem? i saw this in simulation mode, didn`t try yet in real diagnose . I attach pictures with differences

[DB_member]

Did you notice the new button on the right? You can also click the question mark button and find the explanation for the change.

[rocris]

Did you notice the new button on the right? You can also click the question mark button and find the explanation for the change.

Hi,
thank you, it seem to have same task

[ddam81]

Dear
With the help of my friend. i have been succesfully install Xentry 11.2011.

First.
Download MR Zolookas guild 2h
http://www.digital-kaos.co.uk/forums...8/#post1241251

second..
Change the Hardisk Serial Number (thanks to mr Selekos)

3rd
run the Fix from mr WSC

4
install DAS and Xentry via AUTOSWItch from DAS.

5 final
copy the setup.inx i attach in here to folder Xentry_frame/xentry..
and see what happen..

say thanks if u think it help..

Hi, I'm having problems with the installation. I'm installing directly for the first time on this pc the xentry but it go in error when begin to install Xentry and finish the installation with the error. If I install XENTRY replacing your file setup, it say "password incorrect" and stop the installation!!! What I can do?? Thank you

Regards

[ddam81]

Hi sorry again, I've installed Xentry but when it have to load DAS go in crash with error 2173-11: DASService: Failed to create the DAS context-file "DASContext.sli" on path "$DAS_TEMP_DIR"!

I think is because it do not finish the installation correctly by the SDSwitch.

Could you help me please?? Thank you
Regards

[ddam81]

Thanks, now I found this file and fixed the definition and DAS appears to be running fine.

So far I've only tested simulation mode, will have to test DAS blacklist solutions too.

Hi friends which is the file?? Thank you

[ddam81]

Sorry again friends , I found the file was GlobalSystemSettings_install.properties

I've replaced the correct path but later I have another error (18.0) Internal Error: the rate base ..\..\..USERDATA\DAS\Session per Session Protocol file is not found; DAS is terminate.

How I fix this??

[mercecrac32]

Hi all, I just need to understand what means "Install DAS and Xentry via AUTOSWItch from DAS" ! May be I'm too old to play with that ?

[DB_member]

Hi all, I just need to understand what means "Install DAS and Xentry via AUTOSWItch from DAS" ! May be I'm too old to play with that ?

No, you cannot be too old, I would be too old then and I don't want to admit that.

I don't think you actually need to know that, either try the normal way you've done it previously or try "SDSwitch.exe" from the DVD root.

[mercecrac32]

No, you cannot be too old, I would be too old then and I don't want to admit that.

I don't think you actually need to know that, either try the normal way you've done it previously or try "SDSwitch.exe" from the DVD root.

Hi DB_Member,

Thank you for your usual kindness. I got good install via stardiag/setup.exe. All OK in SIM mode (no mux available at this stage to test on a car).

For info I've used 32 Gb USB key to install XENTRY/DAS instead of standard DVD. I found this very convenient because you can manipulate disk content as many times as required (for instance disable antivirus, IE8 ...) or replace files by other more appropriate ....

But now, I'm facing internet explorer not connecting to sites (like google for instance). It starts searching but search never ends ! Since I suspect this to be in relation with Xentry/Das installation, may be do you have an idea ?

In the meantime, pls have a good night.

Bye,

[ontmiss]

Hi DB_Member,


But now, I'm facing internet explorer not connecting to sites (like google for instance). It starts searching but search never ends ! Since I suspect this to be in relation with Xentry/Das installation, may be do you have an idea ?

In the meantime, pls have a good night.

Bye,

go to C:\Programme\SDnetControl and rename NetworkFilter, restart comp

[mercecrac32]

go to C:\Programme\SDnetControl and rename NetworkFilter, restart comp

Hi Ontmiss,

I've done what you say and it works. But what about functionning of SDconnet C4 Mux that I intend to acquire ?

[james44000]

Hi everybody

I have a big problem to instal xentry
when i start the setup i have :
Errors occurred during installation. Error code:0

I copied the setup.inx in the xentry folder and i have

cannot load ressouce DLL G: dasxenr/stardiag/xentry_Frame/FR_isres.dll

Help me

Thank you

[DB_member]

I copied the setup.inx in the xentry folder and i have

cannot load ressouce DLL G: dasxenr/stardiag/xentry_Frame/FR_isres.dll

Which exact setup.inx did you copy and to which exact folder?

[james44000]

I used the setup of nguyennhatquang in post 1
I past the setup.inx in the installation cd (in my usb key) inthe folder Xentry_frame/xentry