The following errors occurred with your submission
- Explorer555 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
The following errors occurred with your submission
- Explorer555 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
thank you if I helpedgratitude motivates me to help further
ofree for everyone !!!
Assistance in pinout Orange 5 with various blocks
WITHOUT PASSWORD FOR EVERYONE ALL
thank you if I helpedgratitude motivates me to help further
alen19091987 (26th August, 2020), Anachem (17th January, 2019), angmar (14th July, 2020), asliyucegsm (16th January, 2019), barto41 (22nd November, 2019), benille (1st December, 2018), boxsport (6th August, 2020), bresto100 (2nd June, 2019), brownbajan (27th September, 2019), BUSUIOKPETRU (28th November, 2018), carsoftobd (9th February, 2019), cotymoto (7th December, 2020), danielif (29th May, 2019), discouver (13th June, 2019), Ducabrem (15th December, 2020), dule14786 (18th March, 2020), eleeinidis (19th January, 2019), Ermakbrat (25th November, 2018), giggihd (9th February, 2020), Holmae (6th August, 2020), karageorgos (29th January, 2019), kolt (24th July, 2022), kreepyme (22nd April, 2020), ledong (21st May, 2019), lidons (30th September, 2019), Malboro (29th November, 2018), megasosio (14th April, 2020), mikroel (27th May, 2019), mohamed_dz (12th October, 2021), omarino (10th May, 2019), Panathaole (10th February, 2020), paulocesar (6th June, 2022), PeterOBD (30th December, 2021), pioneer427 (5th December, 2018), sarigol45 (29th December, 2019), serviclau (19th January, 2024), simiszer (28th December, 2018), skens (5th July, 2022), sokolomo (10th May, 2022), SSautoThemba (2nd January, 2023), stas12 (25th November, 2018), Turbo3 (27th May, 2019)
O5Tool - a set of additional tools for the Orange5 programmer. Includes a square wave generator, a probe, a logic analyzer, an oscilloscope, a CDC device emulator.
Opportunities
Logic analyzer: 8 channels, 32 Kbytes of memory, maximum recording frequency - 2.5 MHz Protocol analyzer: I2C, MicroWire, SPI, RS232 ... Generator: maximum frequency - 16 MHz. Logic probe - 12 channels. Oscilloscope - sampling rate up to 300 KHz, input voltage 0-5 volts.
password in private messages!
site members registered on the site less than 3 months pass by
Last edited by dodge69; 27th November, 2018 at 04:35 PM.
thank you if I helpedgratitude motivates me to help further
alen19091987 (26th August, 2020), Anachem (17th January, 2019), asliyucegsm (18th January, 2019), ballim (18th July, 2020), benille (1st December, 2018), boxsport (6th August, 2020), bresto100 (2nd June, 2019), brownbajan (30th September, 2019), bunda (14th March, 2024), BUSUIOKPETRU (28th November, 2018), carsoftobd (9th February, 2019), Chupsy (8th August, 2022), cotymoto (7th December, 2020), datapage (24th December, 2018), discouver (13th June, 2019), dorofteius (22nd January, 2019), dule14786 (18th March, 2020), Ermakbrat (28th November, 2018), garageozcar (2nd December, 2018), giggihd (9th February, 2020), immokill (4th December, 2018), karageorgos (29th January, 2019), lidons (30th September, 2019), Malboro (29th November, 2018), megasosio (14th April, 2020), mikroel (27th May, 2019), mmtsstyle (14th May, 2019), mohamed_dz (12th October, 2021), nokwueze (4th December, 2018), omarino (10th May, 2019), paulocesar (6th June, 2022), pioneer427 (5th December, 2018), pitake (5th August, 2019), proel (1st October, 2019), sarigol45 (29th December, 2019), simiszer (28th December, 2018), simplo (29th May, 2019), Spass (26th December, 2021), Tolik48 (13th July, 2022), Tzepy (21st November, 2023)
can i get o5tool password? thanks given!
pls i need pass word thanks
Please pass
Hello, Did anybody encounter this issue.
I have both Orange5, Clone and Original.
I accidentally opened Orange5 original while my clone was connected.
Software opened up and said that it is setting up new software.... after that finished, the orange5 clone is no longer visible when plugged in to usb. It does not show any type of life.
I need a good firmware file, but I do not know how to get it since I try to read an orange5
thank you !
Last edited by samatii; 4th December, 2018 at 10:48 PM.
Hello, Did anybody encounter this issue.
I have both Orange5, Clone and Original.
I accidentally opened Orange5 original while my clone was connected.
Software opened up and said that it is setting up new software.... after that finished, the orange5 clone is no longer visible when plugged in to usb. It does not show any type of life.
I need a good firmware file, but I do not know how to get it since I try to read an orange5
thank you !
Hi, I understand the microcontroller at91sam7x256. But where to find the firmware is another question
thank you if I helpedgratitude motivates me to help further
please pass along . thank
simiszer (28th December, 2018)
pass please
password
hello my friend i have a clone orange5. can I use these files
thanks
asliyucegsm and cars repair and notebook chipset repair
Plz Pass …………………...
Bookmarks