CARPROG FULL

[oskar 7]

when updating to 4.74 for doing vag edc16 i saw i must use a1+ adapter, anyone has info about it?

A1+

[qubits]

I just got carprog 5.31 CLONE and tried to reset airbag memory 92c56 from a 06 Toyota. It would read and have error the first time and after that I get
" no response from the unit".
So I restart the program and it would read once and then no response again.

The CD has 3 versions of the software, 4.01, 4.74, and 5.31. All same problem.
Do you think my unit is broken?

I was told this is an easy chip to reset!

[TULGEYWOODMAN]

"I was told this is an easy chip to reset!"

please forward the details of the person who told you this and we will get him for you after school.

[qubits]

5 USD for anyone who joins me tomorrow after school. now I may get a chance to use my flying armbar

[antwnhszr]

hi guy's yesterday i desolder the eeprom ATSC88C from carprog i read with beeprog 2 original and when solder again on carprog .............no device attached..what im doing wrong?any help be appricite...

[xtech]

erased reed agein and see or not good solder

[antwnhszr]

erased reed agein and see or not good solder

how to erase this my dear?do you know?

[gadroulll]

i have erased a lot of times my 4.74 i change the dongle and know works without it . about reseting processor the instruction are not ok from those chinese .
the secrest is to solder the cable to make reset after you desolder it to load the program otherwise it stops 2 %

[antwnhszr]

i have erased a lot of times my 4.74 i change the dongle and know works without it . about reseting processor the instruction are not ok from those chinese .
the secrest is to solder the cable to make reset after you desolder it to load the program otherwise it stops 2 %

gadroulll my problem is on the eeprom AT88SC not the atme. mcu.i need to found how to reprogram this eeprom...
regard's

[teerak2uk]

i have erased a lot of times my 4.74 i change the dongle and know works without it . about reseting processor the instruction are not ok from those chinese .
the secrest is to solder the cable to make reset after you desolder it to load the program otherwise it stops 2 %

what cable did you use for this?

[pawply]

hi
anyone tested the damp At88sc (this without code) of our forum?

[AKAINTERN]

whether or not to flash on 4.74?
what a difference a functional of 4.01?
currently working with a 4.01 meter has not been ...
because a 4.74 meter jumps almost immediately wanted to know supports auto claimed in online and other models which do not have such a 4.01 T5 2009?

[andrius]

What dump? i have a lot of them, non of them is real and working have 25 PCS of new AT88 chips

[AKAINTERN]

What's new in version 4.74 from 4.01?
work with the dashboard Audi, VW from 2009?

[AKAINTERN]

it makes sense to alter at 4.74?