CARPROG FULL

**Aislingob** · 16th February, 2018, 07:59 AM

I bought carprog full and did the honest thing and bought the original item with all original leads 2370 euros with delivery costs, , then on my first job I read a ford airbag via obd when I go to clear the crash data I get asked for 30 euros ,how is anybody supposed to make profit , wud ye guys recomend Orange5 airbag calculators to run with this tool or what would ye guys advise me ??

**rjdosky** · 21st February, 2018, 10:40 AM

Which version of carprog should i get that would reset crash from a 2012 nissan altima 98820zx50A & 2008 infiniti g37s coupe 98820JL00A please help

**Thor2** · 21st February, 2018, 09:02 PM

I have a geniune carprog that I bought about 5 years ago, most of the functions have n/a cos I only purchased Audi RB4 function on top of the functions that came pre activated with the unit at the time.
Is there any way to activate all functions free or do I have to pay 1000 euro to codecard.

**James MR2** · 27th February, 2018, 11:05 PM

Hi, have someone used Carprog online and sucessfully done mileage change on Audi Q7 2007 with Magneti Marelli cluster part number 4L0920930H erprom 95160?
I have saved the dump just in case.

**piter200** · 5th March, 2018, 06:24 PM

Ford focus 2011-2013 with blue display and arrows. What to choose in carprog from OBD? I have 8.21 and later versions...

**maciek007** · 7th March, 2018, 01:31 AM

I have problem with voltage D1 adapter test :

UART1 - OK
K Line 100k/5V - ERROR
K Line 1k/5V - ERROR
K Line 1k/12V - ERROR
K Line 100k/12V - ERROR

what should I replace in D1 or in CP ?

test with +12v 1,5A (its not too strong?)

**naprawa5** · 7th March, 2018, 10:52 AM

Replace the npn and pnp transistors.

**maciek007** · 7th March, 2018, 11:31 AM

Originally Posted by naprawa5

Replace the npn and pnp transistors.

all in D1 ?
1E - BC847 ?
3F - BC857 ?

**Partymad09** · 8th March, 2018, 03:25 PM

can someone could help me VIN CODE VF34C9HXC55272112 IM locking the pin or security code or pass keys is a 308 2008

**lynyrd** · 7th April, 2018, 02:51 PM

Hello!
My carprog China clone, not write mileage.
He read and write eeprom 24,93 series,no problem.
Read correct mileage,but not write a new.
He is stopping on 100% and nothing....
After that the eeprom is empty.
I tested with some versions 7,8,9 nothing
Thanks.

**danngrigore** · 18th April, 2018, 01:12 PM

Hi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left “Device sn:” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanksi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left Â“Device sn:Â” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanks

**drpeter** · 18th April, 2018, 01:29 PM

Originally Posted by danngrigore

Hi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left “Device sn:” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanksi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left Â“Device sn:Â” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanks

BUY ANOTHER ONE FOR 10 USD

**frankrayk** · 18th April, 2018, 01:39 PM

Originally Posted by danngrigore

Hi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left “Device sn:” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanksi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left Â“Device sn:Â” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanks

Reattach the firmware to AT91.
I already had Carprog that was good after the third attempt.

**danngrigore** · 18th April, 2018, 03:44 PM

Thanks. Very kind of you. Is that the kind of advices you are playing around here for?

**mikroel** · 19th April, 2018, 10:44 AM

Originally Posted by danngrigore

Hi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left “Device sn:” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanksi guys
I wish somebody could give me a hint about my issue with my Carprog. Recently I had to replace the AT91 processor because of a failure. I have fitted brand new one, wrote the firmware as per instructions, done all the modifications, all went good. Now when I start Carprog software no matter what version, with or without correct lib file, the software shows on the bottom left Â“Device sn:Â” but after this is blank. No serial number at all. And because of this (or some other reason?) the software does not let me do anything. Please help me find out what I am missing.
Thanks

Wrong MCU

Sent from my iPhone using Tapatalk