CARPROG FULL

[Meat-Head]

Hello work or dont work KM ford by OBD? I test ford focus 2005 and OK,

ON TOPIC:-

Was this the early shape or late shape?

Thanks

[TULGEYWOODMAN]

Hello work or dont work KM ford by OBD? I test ford focus 2005 and OK, but Mondeo 2008, Gallaxy 2010 dont work! with my clone

my friend has this update with original but not all Galaxy work for him, BUT ALL MONDEO has been ok

[TULGEYWOODMAN]

ON TOPIC:-

When it says Focus by OBD is that early one as well?

later dash is 912 earlier dash is eeprom so obviously wont go obd

[Meat-Head]

later dash is 912 earlier dash is eeprom so obviously wont go obd

cheers, just that some focus were a processer.

99% sure you can commicate to diagnostic to the dashboard on these that's all.

So flip it off and IN-correct, thanks.

[TULGEYWOODMAN]

cheers, just that some focus were a processer.

99% sure you can commicate to diagnostic to the dashboard on these that's all.

So flip it off and IN-correct, thanks.

we are talking about 912 motorola from 2005 on.

immed. before that it was eeprom from 2003 ish black back,

before that white back it was old processor.


dont confuse the fact that cars will communicate via obd for scanner, that doesnt mean you can do miles via obd


off topic
ps. dont you think an apology to Arthur is in order?

[Meat-Head]

dont confuse the fact that cars will communicate via obd for scanner, that doesnt mean you can do miles via obd

off topic
ps. dont you think an apology to Arthur is in order?

Well you have answered the question CARPROG can't be used to IN-correct early focus, just the later ones.

OFF TOPIC:-

apology, *CONFUSED* - send me a PM with what i said on it if you have
a copy.

[audiotek]

Hi, I just bought the carprog clone 4.01, I made some tests:
93xx eeprom read/write > OK
24xx eeprom read/write > FAIL
95xx/25xx eeprom read/write > OK
Airbag Module Ford Focus 2004 Bosch 0285001555 > OK
Car radio Symphony I & II decode by direct connection > OK
Car radio Concert I & II decode by direct connection > OK
Dashboard 2004 Toyota Corolla 93c46 > OK
Dashboard 2003 Toyota Echo 93c46 > OK
Dashboard 2007 VW Jetta OBDII > FAIL
Dashboard 2005 VW Jetta OBDII > FAIL
Car radio Philips (with 24xx eeproms) > FAIL
MCU ST92F150 Read > FAIL

I made the Hardware test with adapter A9 and Test is OK, I think the problem is in software not in hardware.

[Meat-Head]

Car radio Philips (with 24xx eeproms) > FAIL
I made the Hardware test with adapter A9 and Test is OK, I think the problem is in software not in hardware.

ON TOPIC:-

Not got mine yet, not got a data sheet for 24CXX to hand, but perhaps
you could use a USB-UPA or something, use olliscope on the pins, then re-scope on the carprog.

[magdex]

Code Calc for FORD M and Chrysler 6 Buttons works OK ! .

[TULGEYWOODMAN]

Hi, I just bought the carprog clone 4.01, I made some tests:
93xx eeprom read/write > OK
24xx eeprom read/write > FAIL
95xx/25xx eeprom read/write > OK
Airbag Module Ford Focus 2004 Bosch 0285001555 > OK
Car radio Symphony I & II decode by direct connection > OK
Car radio Concert I & II decode by direct connection > OK
Dashboard 2004 Toyota Corolla 93c46 > OK
Dashboard 2003 Toyota Echo 93c46 > OK
Dashboard 2007 VW Jetta OBDII > FAIL
Dashboard 2005 VW Jetta OBDII > FAIL
Car radio Philips (with 24xx eeproms) > FAIL
MCU ST92F150 Read > FAIL

I made the Hardware test with adapter A9 and Test is OK, I think the problem is in software not in hardware.

Have you spoken to the supplier?

[TULGEYWOODMAN]

Well you have answered the question CARPROG can't be used to IN-correct early focus, just the later ones.

OFF TOPIC:-

apology, *CONFUSED* - send me a PM with what i said on it if you have
a copy.

Its not just carprog, nothing will do focus before 2005 [late].

off topic

Ask a moderator, if you cant remember what a horrible post you made about Arthurs daughter [it was totally out of order].

[justy22]

The software will only work when it detects a carprog plugged into usb when serial no of unit is then displayed

ON TOPIC:-

For your informatiom, our jump lead swinging friend, i have now got on download a Carprog - from that godiag whatever thread.

Bloke down the pub said about reading Reno pin codes with it, can you give anymore detail please?

Thanks

Meat

[Meat-Head]

The software will only work when it detects a carprog plugged into usb when serial no of unit is then displayed

Cool, would be intresting what the clone serial numbers come up as - all the same or different.

[honingkoning]

Some good updates out today for original carprog only

You mean the vw update, come on its there for decenia.
Carprog is very late with his update, some kind of logic because the tool is a multipurpose tool.
If you want a good Milleage tool, buy the real machines if you want good tools that for not tomuch money buy smok.
I bought some smok tools and for now they did what they suppose to do.

regards Adam.

[elchip]

Solution for CarProg clone COUNTER finded and OK.

Do not PM me for solution I DONT SALE IT !
And I will not share it !

Only I give info.

All best to all ;-)