CARPROG FULL

[Carsoft2003]

I use this update software 4.85 , I do today dashbord caddy with micronas VDD and test ok , I have 2 caprog original with the last update and clone one
I try to read my original carprog with full sofware and test it in clone one

[ahadi]

I use this update software 4.85 , I do today dashbord caddy with micronas VDD and test ok , I have 2 caprog original with the last update and clone one
I try to read my original carprog with full sofware and test it in clone one

sorry my englisch is little . I dont understand

[ALEXEI]

with old lib file all functions from 4.85 are active (strange).
ie P207 bsi 24c128 work

[ahadi]

i see it is real update .

[Meat-Head]

with old lib file all functions from 4.85 are active

So which LIB file? - orginal or the one from Lupu's thread?

[scary]

hi today try carprog clone on ford fusion 08 plate by obd cable and plus ford cable now luck start chek ford cable and find thet pin 7 on both ends no conection and codecard.lt its saying its must be so repair cable and try agan still no luck then try put external power to carprog and try agian and its work perfect .so its means need external power for changing milage on fords .maybe for somebody this post help thanks

sorry for my english

[ovi_dk]

Hi,today make one passat 2007 tdi with c.p,change km ok,read eeprom ok,the edc make wth other tool becouse in c.p 4,85 its n.a,try to do one sprinter 2003 93c66 eeprom and the cp show wrong data on menu,if u press sprinter 93c66 came in sumting in menu like 24c04,i think sumting bug,in version 4.01 and in version 4,85 came ok but aloways get device dont respond!So mb not work,i try 2 cp and the same on bouth/
Regards

[scary]

hi maybe somebody can help i need dump for peugeot 406 2001 vdo dash i try to chnage by caprog clone now its so 000000 and all gages no move
i done bsi manual everyghing works ok central lockin windos starting car no problem so supect daschboard so maybe somebody can help me

[Meat-Head]

hi maybe somebody can help i need dump for peugeot 406 2001 vdo dash i try to chnage by caprog clone now its so 000000 and all gages no move

Cool, just go the the IN-correction section and leech a dump - edit it - hope for the best.

How did you corrupt it?

[ahadi]

no more things to leech . just volta .

[ale197911]

CarProg 4.5 there is no such version
4.01 the most current

[ALEXEI]

CarProg 4.5 there is no such version
4.01 the most current

yes there is 4.5 but it was already posted 4.85. more functions active tested

[ale197911]

http://www.obdauto.com/views.asp?hw_id=1798
with version 4.85 will work?

[Carsoft2003]

Carprog clone work with allversion juste do not update hardware.

[lupu_sandu]

My clone CP is OK after update, read all eeprom's, MCU, airbag,etc but in dashboard section i cannot read any eeprom.
I got always error - "No response from control unit", but only if i try to read eeprom. For dash based on HC08 or 912 is OK.
Also on airbag section i can read eeprom.