CARPROG FULL

[scary]

key for bmw how much i now say not working for toyota dont no

[olegario]

Fiat Stilo diesel 2005 dash ,read by OBD, km real, after write got ------ and Dash Error.
Mcu 0L26M inside, 912D60 ver2 by NYO

[automan]

maybe you have 9s12 inside dash.anyway put new dump and problem solved

[honingkoning]

Fiat Stilo diesel 2005 dash ,read by OBD, km real, after write got ------ and Dash Error.
Mcu 0L26M inside, 912D60 ver2 by NYO

Or maybe try to rewrite with Other tool like fiat om tool Or some pro tool might do the job.

Regards Adam.

[tinerfe30]

I'm in bed too ... but no in the Same bed .
Tomorrow I will test and report it.
Good nigth

Sorry for delay.
In my case, in the section airbag, when try read are the same error."No response from control unit"

[dimet]

Audi A3 2J74Y repair with carprog clone work or not?

[nemena]

Yes it works. Recognizes the sw version automatically and reloads the correct dump into mcu.
Sometimes you need to change the mcu and select the sw version manually, because flash memory is corrupted.

[honingkoning]

Yes it works. Recognizes the sw version automatically and reloads the correct dump into mcu.
Sometimes you need to change the mcu and select the sw version manually, because flash memory is corrupted.

What about dash with 3k85k is it possible to do this 2j74y mask option in carprog.

Regards Adam.

[nemena]

3k85k does not tend to go wrong. It is typical for the 2j74y flash memory.
Anyway, I think the software is the same, but they replaced the mcu because of this problem.

[olegario]

Fiat Stilo diesel 2005 dash ,read by OBD, km real, after write got ------ and Dash Error.
Mcu 0L26M inside, 912D60 ver2 by NYO

Easy cured with Xprog and NYO4

[meteor80]

Have someone already repaired Carprog which can't do dashboards?
I have similar problem.

[captain crackers]

Meteor80, if you bought a new television and found it didn't work, would you try to repair it yourself? Arthur.

[racin-snake]

Meteor80, if you bought a new television and found it didn't work, would you try to repair it yourself? Arthur.

if i only paid a fraction of the cost of a genuine one and the shipping back was gonna cost a fortune ?


then Yes !! i would indeed

what you need to grasp is..................a clone thats working at 80% and 1/18th (or less)of the higher price origonal is very appealing

[captain crackers]

racin-snake. "a clone thats working at 80% and 1/18th (or less)of the higher price origonal is very appealing". What I grasp is that after over 80 pages of what it will and won't do and how to repair a new out of the box one, before you find out what it won't do, personally makes me happy I do not have one and certainly does not encourage me to even think of buying one. Having said that, after borrowing a genuine carprog a while ago, I wouldn't buy an original either. Arthur.

[racin-snake]

well 100 quid and pennies says a clone will pay for itself in a fraction of the time too !!

also i see your side that people with clones will take your work but such is life mate

build a wall and get over it



instead of being a dick wasting your time and bandwidth like trying to convince us all what we already know your trying to lock the door after the horses have well and truly bolted my friend

give it a rest mate your drivels getting boring

the thread would be about twenty pages lighter if it were not for your inane drivel with no help or merit just a hindrance