CARPROG FULL

**obd.tech** · 5th April, 2013, 06:52 PM

Does the CP clone 4.1 work with programming renault keys via OBD?
Anyone tested with success? or does it need higher version no. ?
thanks

**andkl2810** · 5th April, 2013, 08:47 PM

Hi! I checked with vivaro `04 - pin reads correctly but the keys are not programmed , opcom work success!!

**Nikola123** · 6th April, 2013, 12:29 AM

clio read pin and programming key obd ok
laguna2 read pin ok, key must programming with can clip

**athlonxp** · 6th April, 2013, 07:15 AM

laguna 2 read pin and program card ok no need any clip. megane 2 scenic 2 via can not work.

**javyb** · 6th April, 2013, 09:27 AM

Is carprog clone any good for airbag module repairs and extracting pin codes for key programming even on new cars such as VAG, etc

**TRISIEN** · 6th April, 2013, 04:38 PM

i have carprog 4.01 no read dashboard w 2008 micronas
help me thanks

**Min2xx** · 6th April, 2013, 05:16 PM

For VW 2008 micronas you need buy new original

**Nikola123** · 7th April, 2013, 11:05 AM

any clip is renault can clip

my carprog clone cant programming card, only read pin

**teerak2uk** · 7th April, 2013, 11:54 AM

Originally Posted by javyb

Is carprog clone any good for airbag module repairs and extracting pin codes for key programming even on new cars such as VAG, etc

Keys I don't know but have used it for a couple of Siemens srs modules on 2008 fiesta and did then through obd so has paid for itself already

**obd.tech** · 7th April, 2013, 12:04 PM

Originally Posted by Nikola123

clio read pin and programming key obd ok
laguna2 read pin ok, key must programming with can clip

What year/model was the clio please
thanks

**athlonxp** · 7th April, 2013, 12:54 PM

Originally Posted by Nikola123

any clip is renault can clip

my carprog clone cant programming card, only read pin

you can not program card with clip if card is not prepared by vin from factory only with very old version of can clip (till ~v70). If you change pcf in your card and prepare it so you can program it with carprog or any other device but not with can clip. I know about this older renault not so bad.

**Nikola123** · 8th April, 2013, 01:39 AM

Clio 2002/2003 year, carprog finished all

Yes of course, I prepared pcf for laguna keycard with zed bull, and login with can clip, and pin is read with carprog

**mexanico1971** · 8th April, 2013, 01:56 AM

Hi !
is there any deference bet win MM74hc125m and CD74hc125m or MM74hc126m ?!
thank"s in advance

**ubistvo** · 8th April, 2013, 10:37 AM

Originally Posted by mexanico1971

Hi !
is there any deference bet win MM74hc125m and CD74hc125m or MM74hc126m ?!
thank"s in advance

Its all the same
Look
http://pdf1.alldatasheet.com/datashe...S/74HC125.html
http://www.ti.com/lit/ds/symlink/cd74hc125.pdf
Only its diferent factory

**teerak2uk** · 8th April, 2013, 06:33 PM

Originally Posted by Nikola123

Clio 2002/2003 year, carprog finished all

Yes of course, I prepared pcf for laguna keycard with zed bull, and login with can clip, and pin is read with carprog

Clone or genuine zed bull