OPENBOX S10 NO CLONE 05/01/2012 Beta firmware

**mrfarnhigh** · 13th January, 2012, 10:14 PM

Originally Posted by slugworth

If you look at the .abs you will see they are only using about 1/2 the flash now.
The receiver isn't linux,it uses ali tds2 rtos
Mainboard: 396MHz MIPS CPU, 128MB DDR400 RAM, Memory Clock 198Mhz, 4MB Serial Flash, Single Tuner, DVB-S2 demodulator

mb you have clone?
that's what I have:
Specification
*Chipset and Memory:
CPU: 396MHz
Flash: 4Mbytes
RAM: DDR2-1Gbit

and the firmware is 4mb, where is the half?
also I guess it doesn't metter if it's linux or not currently, on those cpu you can find linux receivers too, so I guess it's solved, why not to support the idea? it will only make this receiver better

**slugworth** · 14th January, 2012, 05:24 AM

Originally Posted by mrfarnhigh

mb you have clone?
that's what I have:
Specification
*Chipset and Memory:
CPU: 396MHz
Flash: 4Mbytes
RAM: DDR2-1Gbit

and the firmware is 4mb, where is the half?
also I guess it doesn't matter if it's linux or not currently, on those cpu you can find linux receivers too, so I guess it's solved, why not to support the idea? it will only make this receiver better

page 3 of the users manual says 128mb ddr400 ram.
not a clone.
the sdram.ini file of the rs232 loader is set for 128mb ram.
1/2 the flash is code,the other 1/2 is FF's so only 1/2 is being used.A moot point since most code is usually transferred and runs from ram anyway.