For all - a way to precoding new PCF7947 for Laguna card with cloned ZedBull

[jaca4591]

After replacing the transponder PCF7947 need to be precoding remote control to work properly. You can do this with expensive equipment - TP2, Tango, or the original ZedBull.
But I found a way how to do it with ZedBull cloned.

1. PCF7947 new mount in the card. Then go to HITAG2 buton in Zed Bull software.
2. In the menu select PCF7946 and press the button: "READ ALL PAGES"
3. In section "TRANSPONDER " in the third page, change the bytes as shown in the picture.
4. The same way you do in the "REMONTE" section.
5. Press the buttons: W3, W4, W5, W6, W7
6. The card is ready to be programmed in the car.

Description is designed for two button key card Laguna 2 2001-2005

Good luck.

[dam495]

with zed bull clone , can i pre codec fiat with dash 95c160, this is the module 100 from tm pro, but can i do it with zed bull clone?

[jaca4591]

with zed bull clone , can i pre codec fiat with dash 95c160, this is the module 100 from tm pro, but can i do it with zed bull clone?

Unfortunately I have not tested the Fiat. Gives only solution tested by me. In the future I am planning to provide data for the 3-button Renault Cards Megane and Laguna.

[smokey08]

In the future I am planning to provide data for the 3-button Renault Cards Megane and Laguna.

This thread may help you.

[coolsoda]

Do you have hitag2 pages 3 ,6 & 7 for the 3 button clio Key with blade
Thanks

[coolsoda]

Here are the hitag2 pages from a genuine NEW renault megane 3 button card (Not Chinese)note page 7 is 00000000 i programmed this to the car all ok,i think page 7 changes with every press of the buttons for the rolling code

[PierreTheron]

Do you have hitag2 pages 3 ,6 & 7 for the 3 button clio Key with blade
Thanks

Hi .

Have you got clio 3 ??
I have got it ,, So do not bug me on it..

Easy peassy piss..

[coolsoda]

Not sure about that response ,i dont have the pages,im glad you have them,if someone wants to share and does not feel bugged would it would be appreciated

[PierreTheron]

HI

Just for you my mate .Clio3 3 button key.

[verica]

with this configuration on pages card is with working remote and only need to code it on the car

[auto4]

Hi, Anybody have hitag2 pages configuration for one button remote control for a clio II (2004) Key?

Thanks

[pandora6]

Renault one button.

[PierreTheron]

with this configuration on pages card is with working remote and only need to code it on the car

Hi mate

What pages ,from which post . Will be more specific to help others i think??????

[coolsoda]

Here are pages for a 1 Button genuine key

[auto4]

Renault one button.

Here are pages for a 1 Button genuine key

It is for Clio II ph2 with 7946 in remote control. Which of both is?

Thanks.