Problem solved. I made a little how to, so you don't have to go to Audi to have unlocked the eject button.
regards, Pipina
Hi, does any body know, how to enable the eject button on Audi A4 B8. I read this http://wiki.ross-tech.com/wiki/index..._System_(RNS-E) but I can't acess to navigation 37. I think there is another trick, because if I use KTS I can look at actual value eject button in Informat. electronics 3.0 wich is equal at VCDS 5F-Information Electronics. If I'm wrong please correct me.
regards Pipina
Problem solved. I made a little how to, so you don't have to go to Audi to have unlocked the eject button.
regards, Pipina
Thanks
Have you tried this:
Audi A4/S4/RS4/Cabriolet (8K) 2008+
[37] - Navigation
Channel 067: Ejection
Channel 068: Ejection Lock
- 1 = Eject CD/DVD
Audi A8 (4E) Navigation - Ross-Tech Wiki
- 0 = Eject Button active
- 1 = Eject Button inactive (Anti-Theft)
I use VCDS Release 10.6.0 for other I don't know.
Helloat all, Hello Pipina. I'm looking for your solution for a long time now. I have try all the control module with changing the value of the 67 channel. Has you, I don't have the navigation control module installed.
Can you explain me your solution ? Thanks your answer
Hello at all, Hello Pipina.
I'm looking for your solution for a long time now. I have try all the control module with changing the value of the 67 channel. Has you, I don't have the navigation control module installed.
Can you explain me your solution ? Thanks your answer
I had the lock in it, unlocked it with VCP.
STG 37 - Set adaption channel 68 to the value 0
Last edited by Helpmeplease196; 17th January, 2019 at 10:51 PM.
I can screw and diagnose, for chiptuning I need your help
Bookmarks