dm7000 boatloader needed

[jcdavo]

i have had to jtag my dreambox with home jtag 100ohm resistor through the printer port and i used jtagwin5*** .i have connected ok and uploader file ok and all seemed ok but she still wont boot but can connect to dreamup though coms port but when i connect it shows box type dm 56** so the bling file (bootloader) must have been for wrong dreambox .i have been searching for 3 days now and can not find the proper files for a dm7000 any i find r deadlinks

can anyone help

davo

[Devilfish]

Dm500, Dm56xx and Dm7000 images are all the same; enigma1, so you might be ok to flash an image now. I'll have a look for a specific 7000 bootloader though.

[jbvid]

@jcdavo
Hi
Found one for you to try, let us know if it works ok.
jbvid

[jcdavo]

no sorry it comes up not valid archive when i try to unzip it

[jbvid]

no sorry it comes up not valid archive when i try to unzip it

Hi
Try it again now, I have rar'd in after unpacking it from being a zip file.
jbvid

[bobon5106]

hes another to try if that one dosent work

[bimo]

Hi
Try it again now, I have rar'd in after unpacking it from being a zip file.
jbvid

how to download?????????????????????????????????????????? ????????????????????????????

[washburn]

I have also screwed my bootloader on my dreambox 7000. I emailed Dream multimedia who want me to send it back to them and they will do it for 20 Euro. Problem of course is its no doubt going to be gone for the best part of a month if not longer. Cannot find anything on the net. Plenty of schematics for a JTAG but no uncorrupted bootloaders. Seems I will just scrap it and sell it on ebay...

Sorted it....

[Nick_28]

No ideas? Is there any capacitors needed to be changed? I had a Kaon 570 with such a problem - the jtag did not changed anything but 2 capacitors in psu fixed it.

[decept]

I have a jtag cable I made for a CubeCafe-Prime will it work for a DM7000s?

[bmw98]

Seem to be a common problem with dm7000. Thanks for the soft!

[ljungh]

I have bought a old dm7000s and in the display it only comes up Dream multimedia nothing else? is it the bootloader that has been crashed?

[benny/9]

I have bought a old dm7000s and in the display it only comes up Dream multimedia nothing else? is it the bootloader that has been crashed?

********************************************
have you tried to flash a image that failed?
remember you only use a boot loader if the
boot file on the box is corrupt.

[Ezel86]

My Dreambox DM7000S boots up but after it has booted, the screen gets black and displays "Dream Multimed 1.10" on the display. Have used DreamUP to reflash with another firmware for DM7000s, but no luck. The problem is still there.

This problem happened randomly after I was searching for channels, turned off the box and started it up again.
What can the problem be? failed bootloader? If this is the case, what do I need to do? Have not tried these bootloaders yet, but is it just to use the files above with DreamUP, nullmodem cable and crossover?


Thanks for your help.

[stangman]

as jcdavo referred to the second bootloader, going to try the same thing.

Funny thing is I already jtagged my DM7000, and now the display powers up, and goed to sleep mode, after 30secs it will wake up and go to sleep again,
no communication with dreamup or anything else.

Cross fingers and hope this bootloader will fix it ...