Cable Iveco 30 pin for Autocom trucks

**AlfaRed** · 24th January, 2012, 10:56 PM

Please does someone have the original pinout of the iveco 30 pin cable?
What sold me does not work ...

Thanks

**micromax** · 24th January, 2012, 11:03 PM

30 or 38 pin?

http://www.digital-kaos.co.uk/forums...trucks-237172/

**AlfaRed** · 24th January, 2012, 11:09 PM

30 pin!
My not work...

**micromax** · 25th January, 2012, 03:17 PM

i have this cable. i make connection 4 U.
my plug dont have number on pins. i have picture from esi. pictures is from diagnostic socked in car, numbers is in car. not in plug from autocom.

**AlfaRed** · 25th January, 2012, 10:28 PM

Maybe I found the problem. The Autocom 30 pin cable for Iveco has the gnd and the +24v one for OBD setup badly interface. Pin 28 gnd and +24v pin 29.
Instead on the vehicle the gnd is the pin 29 and +24v pin 30!

**micromax** · 25th January, 2012, 10:44 PM

i never test this cable.

**Tachotony** · 25th January, 2012, 11:08 PM

hi look on the right site there is an OBD 16 connector

the Iveco 30 pin is for Iveco i had the same problem

it is not the cable

T

**scs-mem** · 26th January, 2012, 01:07 PM

hi,
tested my adapter on stralis work perfect.
Regards

**AlfaRed** · 4th February, 2012, 03:36 PM

Originally Posted by AlfaRed

Please does someone have the original pinout of the iveco 30 pin cable?
What sold me does not work ...

Thanks

Resolved, I enclose pinout cable..

**ady3333** · 19th March, 2012, 10:05 PM

Originally Posted by scs-mem

hi,
tested my adapter on stralis work perfect.
Regards

and you give as your pinouts?
please?

**scs-mem** · 25th March, 2012, 07:20 PM

Originally Posted by ady3333

and you give as your pinouts?
please?

Ive used cable like ive got from china.
Hope this help.
Regards

**Pachis** · 30th May, 2012, 08:04 PM

Originally Posted by AlfaRed

Resolved, I enclose pinout cable..

Sure it works m8?
I have yet three iveco 30 pin cables and none of them work.
What sides are the drawings from? OBD female and 30 pin female (i.e. the attached in the car/van ones)

P.D. My cables pinout are like the 4# post diagram.

**AlfaRed** · 30th May, 2012, 08:36 PM

Originally Posted by Pachis

Sure it works m8?
I have yet three iveco 30 pin cables and none of them work.
What sides are the drawings from? OBD female and 30 pin female (i.e. the attached in the car/van ones)

P.D. My cables pinout are like the 4# post diagram.

My pinout work 100 %!!!
Tested ok

**AlfaRed** · 30th May, 2012, 08:42 PM

New cable 30 pin for Iveco to resolve this problem.
Free Shipping IVECO 30Pin cable for Autocom CDP for Trucks

**aniic** · 8th June, 2012, 09:02 PM

Hello everyone!

OBD autocom Diagnosis conector Iveco
2........................ 2 EDC+Immo
4+5.....................30 Vehicle mass
6..........................4 ABS/EBS+ecas
13.........................8 multiplexBC/FFC/RFC
14.........................14 cluster tachograf
15..........................18 Eurotronic
16.............................27 positive (+30)

Regards,
aniic

Thread: Cable Iveco 30 pin for Autocom trucks

Thread Tools

Display

Cable Iveco 30 pin for Autocom trucks

Ivec0 30 pin testerd cable

Bookmarks

Bookmarks

Posting Permissions