Went to help out a friend of mine and alined his dish ect so to get him going with his new dreambox 550s.
The box had the Pli Jade software on it, and so i went on to install the sat possions he wanted and a weird thing started to happen....
It scanned and worked on astr1 but then as i was looking through the channels ect the picture started to flicker like say a loose scart ect or signal issue and then all of a sudden it booted off and then back on but the screen went blank and black ?
Got the box here and so after chequing the mac address and sticker i decided to reflash it in case it was a bad flash, but it would`nt connect.
Eventualy did after about 40 goes and took the new flash but same type of thing with like interfearence but more like a surge type of interfearence.
Puzzeled me to hell then after working on it for a few hours it got worse, then i noticed a weird buzing coming from the power supply, and then the box went off and back to black blank screen ?
The green light shows up on the box when plugged in but nothing no pic ect.
I`m thinking it a issue with the power supply as cant find any other issue, but do the 500s powersupply buzz ? never used these b4 so dont know.
Thanks for any help as doing this as a favour for a friend.