Vu+ Duo Clone *3.1.1 Kernel Update*

**sh500** · 16th February, 2012, 05:20 PM

Anyone tried the latest VIX image with this update? Any problems with it on the clone box?

**digicon** · 17th February, 2012, 02:53 AM

Vu+ Duo Clone *3.1.1 Kernel Update* Revision 3

Just an Update Ferrari have in the last 2 days released 2 new versions of this update the one i have posted here is the latest Revision 3, The only difference is this one will let you go back to older images if you prefer, There is nothing wrong with the other files so no need to be alarmed that is the only change with this loader

Thanks

**garry002** · 17th February, 2012, 04:52 AM

it must be done before or after the flashing image? once or every time of flash new image?

**digicon** · 17th February, 2012, 11:00 AM

Originally Posted by garry002

it must be done before or after the flashing image? once or every time of flash new image?

Just the once before you upgrade the image once done that's it.

**colin445** · 17th February, 2012, 01:23 PM

I have just taken delivery of a Vu+ Duo.
Any tips, tricks and the best way of getting this unit up and running would be appreciated.

**potrobber** · 17th February, 2012, 01:35 PM

Originally Posted by colin445

I have just taken delivery of a Vu+ Duo.
Any tips, tricks and the best way of getting this unit up and running would be appreciated.

is this a clone or genuine unit?

first thing you need to do is download the image you want to go with and put it on a clean usb stick

**mdt** · 18th February, 2012, 01:45 PM

Originally Posted by colin445

I have just taken delivery of a Vu+ Duo.
Any tips, tricks and the best way of getting this unit up and running would be appreciated.

firstly you should say hello in the introductions thread then update your signature and profile with your system(dish size,fixed or motorised) and state if your box is a original or clone. give as much info as possible... help us to help you!!, regards mdt

**garry002** · 18th February, 2012, 07:35 PM

I have a problem with the duo clone. He does not running, the display is written "starting" and then to "vu+ duo" and starting again. What can I do?

**dell_xps** · 18th February, 2012, 07:59 PM

You'll have to reinstall the image m8, update the kernal first then install the latest image.
Look for Digicons post about clone kernal ok.

**garry002** · 18th February, 2012, 08:11 PM

what is the "image m8"?

**RuberDuck** · 18th February, 2012, 08:17 PM

Originally Posted by dell_xps

You'll have to reinstall the image m8, update the kernal first then install the latest clone image.
Look for Digicons post about clone kernal and clone firmware, do not use official firmware from Vix etc. use modified Vix etc firmware or you will brick your clone ok.

i'm sorry mate but thats wrong. there are no "modified" images as there are no so called clone bombs. you have to patch the receiver it self so that it can run kernel 3.1.1 images.

**dell_xps** · 18th February, 2012, 10:43 PM

I stand corrected RD !

**alexenergy** · 1st April, 2012, 10:44 AM

Hi, i try to update a MAX+Solo (Vu+solo clone) but 1? step update don't start...

**dell_xps** · 1st April, 2012, 10:49 AM

Does it have a white v2 sticker on top of it ?

**benny/9** · 16th April, 2012, 02:32 PM

here is the duo_scret 311 kernal update file
along with the loader panel to send it to your box
dont forget to use the rs232 board in line with your
null modem cable when loading this file