Immo Location Ford Fiesta 1.250cc

**p30esteves** · 15th February, 2012, 08:48 PM

Hi need immo location in the ECU, from Ford Fiesta with EEC-V XS6F-12A650-PB

**Meat-Head** · 15th February, 2012, 10:21 PM

USE THE SEARCH BOTTON, WAS POSTED A FEW DAYS AGO.

DAMM SORRY CAPS LOCK.

here is the link -ON THE CONDITION - you look at the immo led in the clock - see if it stops flashing or what it does when fixed?

Meat

http://www.digital-kaos.co.uk/forums...-eec-v-252943/

**p30esteves** · 16th February, 2012, 10:23 PM

sorry, but it doesn?t have any solution for my ECU. I don?t want to do immo off, i just want to swap immo files, that?s why i need to know immo location in my the ECU.

Thanks

**Meat-Head** · 16th February, 2012, 10:33 PM

Originally Posted by p30esteves

sorry, but it doesn?t have any solution for my ECU. I don?t want to do immo off, i just want to swap immo files, that?s why i need to know immo location in my the ECU.

Thanks

*CONFUSED*

Thought yours was one of them - did you see the link to the upload of Bram380.

Right, sorry, unhelpfull time.

There was a thread, ~~~~s knows where or what called or by who, but same question - answer was the small eeprom next to that arse cocking processer.

See if you can get a magnifiying glass, read the numbers on that chip - then use the search botton on here.

Add them numbers to this thread for furture reference

**Zohar** · 16th February, 2012, 11:52 PM

Originally Posted by Meat-Head

USE THE SEARCH BOTTON, WAS POSTED A FEW DAYS AGO.

DAMM SORRY CAPS LOCK.

here is the link -ON THE CONDITION - you look at the immo led in the clock - see if it stops flashing or what it does when fixed?

Meat

http://www.digital-kaos.co.uk/forums...-eec-v-252943/

Hi.

This is another ECU type, construction is not same. No solution for immooff for now (if not- plz correct me). Visteon EEC-V ecus have a many modifications. Only POWERGATE (used flash is 28fxxx with a specific pinout) can read flash of this ECUs for now, and i think, immoff solution will be made not quickly.

IMMOFF with remove square chip from board (TMS370) works only with some EEC-IV ECUs and some old EEC-V ECUs

in some EEC-V ECUs, immobiliser is physically present in ECU, and in this case, key data have been stored in external EEPROM (Mondeo, Ka, and etc.).
If SOIC8 IC 77012 or 77014 is present - you should try to read this as 25020/25040/25080 and then program keys in dump (4C TEXAC)

BR