Mazda 6 2003.
Can anybody know where is Passenger Occupation Detection System options in IDS VCM Ford and can i turn off if i have problem with passenger seat occupancy sensor?
Mazda 6 2003.
Can anybody know where is Passenger Occupation Detection System options in IDS VCM Ford and can i turn off if i have problem with passenger seat occupancy sensor?
Last edited by domel45; 21st March, 2011 at 11:07 AM.
You have to use emulator
can you have connection diagram to mazda 6 2003? i tested today with emulator (i had from frien) and i have troubel with connection.I have 2 plugs - yellow with 2 wire(red, green), and white with 3 wire (red, black/red,black/blue). Can i use emulator with 3 wires and connect to wires in plugs? Yellow plug is to backrest, left white plug. I connected to white plug (red - +12V, black/red - GND, black/blue - signal line , but i have error 23.
![]()
![]()
![]()
Last edited by domel45; 21st March, 2011 at 11:07 AM. Reason: change requestion
Hi
The White Plug is the one for your Seat Occupation Sensor.........The yellow Plug is for the Side Airbag...
Hope this helps.....
Ash
Thanks Ash
Oh yes if my post was helpful than Please don't forget to press the Magic word Thanks
Quick and easy emulator! I found it now:
Mazda passenger airbag seat occupancy sensor emulator box bypass | eBay
even though 2 legs from 8 are not bonded, a spider is a still spider (93c86)
Bookmarks