Configuring com ports for DAS Xentry

[florinyes]

Hi


Having this problem for a long while but never managed to ask:

I have a Dell D630 installed Das Xentry all fine, but when it comes to configure com port I have only port: COM1

Configuring this to: COM2 , 115200 etc still not working..

I also have a Panasonic Thoughbook CF-19 that has 2 COM port enabled and that works fine if disable COM2 and reconfigure COM1 as COM2.

Any idea anyone?

Thanks

[yuuki]

Hi


Having this problem for a long while but never managed to ask:

I have a Dell D630 installed Das Xentry all fine, but when it comes to configure com port I have only port: COM1

Configuring this to: COM2 , 115200 etc still not working..

I also have a Panasonic Thoughbook CF-19 that has 2 COM port enabled and that works fine if disable COM2 and reconfigure COM1 as COM2.

Any idea anyone?

Thanks

Before you install the DAS, the setting of the COMPORT How was.

I feel like a bad OS that will be.

[florinyes]

Before installing das was same..
Just installed XP again and same shite? Bios is funny enough on the Dells...I can see 4 port on Bios but only one enabled and can't figure how to reconfigure?

[yuuki]

Before installing das was same..
Just installed XP again and same shite? Bios is funny enough on the Dells...I can see 4 port on Bios but only one enabled and can't figure how to reconfigure?

Check once again the settings in the BIOS, if all else fails is, what if you try to reinstall the OS?

Please check the SERIAL port settings in the BIOS.

If there is any photo is easy to understand.

Good Luck!!

[florinyes]

I've reinstalled XP and same story..

[yuuki]

I've reinstalled XP and same story..

Nevertheless, it can not be helped when amusing.

Good Luck!!

[florinyes]

Hi

I think my problem is not com port configuration but das software.. IS this new das 01.2012 that I've installed and doing this..

Is it right compact 4 in registry?

Cheers

[DB_member]

Hi

I think my problem is not com port configuration but das software.. IS this new das 01.2012 that I've installed and doing this..

Is it right compact 4 in registry?

Cheers

Mine works fine, with Compact4 in registry. Could still be your DAS installation.

[florinyes]

Done allready 4 fresh installs on two laptops and followed this guide http://www.digital-kaos.co.uk/forums...lation-247176/

I can't hear any relay clicking on mux when tries to connect to car..so i just think something withing the software..