Re using Renault 1 Button Remote Leys ID33

[coolsoda]

Here is a screen shot from zed-bull on how to add used 1 button Clio & Kangoo pre 2002 Remotte keys,not done it myself,but seems it can be done

[richard27]

but a more easy and simple remote control may be fitted ??
(is not easy)

[igorr]

Here is a screen shot from zed-bull on how to add used 1 button Clio & Kangoo pre 2002 Remotte keys,not done it myself,but seems it can be done

I done a couple and it work

[albertros]

Now if we could get DDT2000 to write / read the 93c46 in the BMT lifewould we a lot simpler, anyone managed it?

[HeXeN]

Kangoo 2000
I tried to add 1button remote with RET but it only once lock/unlock doors during procedure then not work anymore.
Remote is from this car, only starts. It has no separated id33 inside, it is on the pcb.
Is possible to reuse remote from other car?

[gokart]

If you have zed-bull, the answer is affirmative. Although, I would not afford so much energy on it. The keys are unreliable and the procedure is relatively complicated.

[ninja123]

I have tried this several times and never worked, some times the remote worked only half way through the procedure then nothing when finished.

Far easier to add remote locking box from ebay, prob more reliable too!

[godfathertre]

If you are using renauult ecu tool there is a problem with the programming and the remote on id 33 clio sagem bmt i have already reported the procedure does not work it says reset bmt to virgin and learn keys and vehicle will not start reported this to developer of tool. The remote works once than not work anymore plus the virgin and learn keys does not work immobilieser goes out car does not start tried this on 2 clio with sagem bmt 1998 to 2000 tool says reset bmt which is the immobilieser and than program remote neighter procedure works
On the vehicle tried this on 2 clio 2000 year with
Sagem bmt hope the developer will fix it .

[R2D2R2]

If you are using renauult ecu tool there is a problem with the programming and the remote on id 33 clio sagem i have already reported the procedure does not work it says reset bms and vehicle will not start reported this to developer of tool. The remote works once than not
Accepted tried this on 2 clio with sagem tool says reset bms which is the immobilieser and than program remote neighter procedure works
On the vehicle tried this on 2 clio 2000 year with
Sagem bms .

Tested on ID33 Key , 2002 Master 2 ( 2.2 dci ) , can't learn key after virgin immo box , process not works with Renault Ecu Tool , an risky procedure for nothink !
After virgin car is dead ....

[Atex31]

Here is a screen shot from zed-bull on how to add used 1 button Clio & Kangoo pre 2002 Remotte keys,not done it myself,but seems it can be done

Yes, this works perfectly but it's convoluted and you have to follow the instructions to the letter.
I have done at least 10 of these.
It doesn't work on the last of the Renault Masters due to a different Eeprom (93C56).


Sent from my LYA-L09 using Tapatalk

[R2D2R2]

Yes, this works perfectly .... you have to follow the instructions to the letter.



Sent from my LYA-L09 using Tapatalk

Just not work master 2 , be careful !!! Clio 2 OK

Clio 2 it's not risky , if any problem come made ECU virgin & cut immo line , and car start