mercedez smart softouch code

[harveyking]

hi can anybody please help me get the softouch code for my smart 600cc four2 vin number: WME01MC01YH090990. thanks

[grinich]

Try this: NFCS-H2O6-EHHN

BR

[diaboliko23]

NFCR-T27N-6MHS Better this one.

[harveyking]

tried the first one NFCS H206 EHHN did not work,
will try the second one and post reply.

history of this car:
i notice there was a lag in the power when i was stepping at the accelerator. so i plug in with my MB star pro diagnostic, shows boost problem,so i erase and road test is again. at first power came but while driving around again little lost of power. so i plug again with my MB star pro and again boost problem so i erase it again. so no fault now.
then i scroll to the system and saw programming of control unit. so i press to start programming. but it stop. now it is written:control unit programming was not completed successfully.
also error in communication for the MEG.i tried the selftest of control unit and written control unit fault.
in the panel were the neutral (N) or automatic (A) sign is only a straight line now appear. can not start the engine anymore.
what should i do now.

[harveyking]

in addition:
i already check all fuses,relays connector and everything seems OK.
read one thread instructing to check also the fuse at the back of the speedometer gauge but upon removing the gauge did not see any fuse there.
any other suggestion to do. have ask some mechanic and said i should change the ECU but when i read the diagnostics you should first read the old one and transfer the file to the new one. but as of now can not read the old one.
is there a way i could just program the old one?since it was not completely programmed successfully.
VIN number: WME01MC01YH090990
can i just get another used ECU from another car and plug it to this car?
please advice

[gigaz]

you can program the ecu, not via obd, only bdm now
next time believe what the ecu tells you before you kill it

wastegate problems are usual with these