I got this BDM document that will help you
I got this BDM document that will help you
Thx for this. Is any solution to "wake up" in Service mode, some boot options ? I have 2 ECU, both doesnt work on the car, software problem, and looking possibility to read this.
BDM ECU's don't have boot mode, there is a Motorola 55x MPC, so can read/write them with proper BDM interface. If you got right ORG dumb you can rescue those ECU's..
OK, perhaps there is no Boot mode in BDM, but how I can estabilisth connection ? Would you describe PIN-OUT from this board to BDM ? Perhaps my wires is wrong ?
I download org soft via KessV2 so I have org dump, but no idea how to write via BDM. Kess V2 have conneciton via CAN, but there no CAN.
Last edited by Maartinj; 2nd June, 2012 at 08:21 PM.
On the BDM pins there is no CANBUS. BDM has it's own layout. You have to connect pins with right probe to the BDM and do the external power connections. So you will be able to read&program the ECU.
I know that is no CAN on BDM. ECU was read and write by KESS V2 via CAN. Now I want to PICK-up this via BDM but I have no connection. I am looking each PIN description for this ECU. Dou have this ?
Sorry only have this doc..
Hi Quattrotr
Question can you read and program ecu Scania 2011-2012 i am very interested obd or bdm
thanks in advance
Regards Tonny
Did not give a try for those models yet.
hi im new user i need this picture thanks
Then download it!
Maybe this help you
i have scania EMS S6 PDE have proplem can see EMS on SPD3 and i think it proplem on eeprom and MPC555 flasch
So i change new Mpc and eeproom but can not write new program for it by DBM100 , i do not why ???
mey be conect wrong ?? who know what prorlem please help me ???
Bookmarks