E60 CAS 3 Swap Engine

[digitalbac]

Hi,
I would like to know what is the best way to do a synchro between CAS and DDE

Situation :

E60 525d , I plug a 530d engine inside the car, the ECU is different regarding the bosch reference only the connector is the same


My purpose is to start the engine with the 530d ECU so what is the best way to synchronize (ISN I think) the CAS box with the DDE ECU

Thank in advance for your help and advise !

Regards,

[leandroks]

swap the eeprom and flash and star the car...

[digitalbac]

Hi,
Inside the both ECU the eeprom are not the same

Someone can help me if I post the dump to insert the pin code and the isn code ?


After that I have to synchronize my ECU with a specific tool ?

BR

[digitalbac]

Problem solved !

Read the CAS and the new Eeprom
Extract the ISN code from the ECU
Adjust the CAS with the ISN
Write the CAS
Sync CAS DDE with tool as DIS, AVDI etc ...

Hope this help !

BR