Any one have tested the fiat Marelli type 5 with remote key?
Module number 145.
Envoyé de mon LYA-L29 en utilisant Tapatalk
No news obviously. Seems like it's still in ALPHA state.
sierra - have you seen the new MART tools ? It seems like very simple and cheap to manufacture but working OK hardware. Is it possible you make the hardware like that and release the tool in final state? While there are still people who would buy it...
Any one have tested the fiat Marelli type 5 with remote key?
Module number 145.
Envoyé de mon LYA-L29 en utilisant Tapatalk
didi_du_93000 (11th March, 2019)
anyone knows if zed bull can pull pin code for 2005 dodge ram (chip id is 4D46)?
Regards
can anyone please let me know if it works on a 2005 dodge ram (chip id is 4D46) to clone key? i dont want to buy and its useless.
Thank you
You woke up few years too late mate. Better tools on market for copying chips.
if you just need it for 1, pay a locksmith to do it for you, there are heaps of tools that can copy ID46
if its cheap i rather buy in case i need to make another key, im a dealer i receive some cars with only 1 key. i have skp1000 and obdstar x300 pro but they dont read pincode for ram 2005, so i need an alternative but i want to make the key myself not in a locksmith. maybe ill buy handy baby 2 and just spend on that good tool.
Hi all,
I'm doing Kawasaki ZX10R akl
i read eeprom and try write to tpx2 but unsucessfull and i see that tpx2 is not suported by zedbull clone and effi
i have only vvdi key tool and zed bull clone, is there any chance to enter data manually via key tool or use diffrent transponder
this program has performed an illegal operation and will be shut down
I don't recall having problems with ZedBull and TPX2. It can write on it but can't duplicate it.
Did you try several times and did you read the TPX2 to see if it was written?
You can always use a CN2 or even better a CN5 transponder.
And if you know the content of the 4 pages you can write them manually, sure.
Chupsy (16th April, 2019)
Hi mates, Where to buy zedbull clone good quality?
Here, try writing this info in the TPX2 chip. It is generated from your dump with EFFI.
1555419038242.jpg
EDIT:
PG1 FF
PG2 05
PG3 00000001
PG4 4B48494350
I used standard 4D from xhorse because tpx2 gives error "write failed" on vvdi key tool
i write data and bike started, for everyone who have trouble here is picture how to enter data into vvdi
thanks autoTkey for help
this program has performed an illegal operation and will be shut down
autoTkey (17th April, 2019)
Bookmarks