Zed-Bull clone - Second Life

[trinicolin]

hi guys now tried to use my Zed Bull [Zed-Q x plus] for the first time and it is not recognizing any transponder. Has anyone come across this situation. I need to know how to solve this problem. thanks guys

Sent from my SAMSUNG-SM-N910A using Tapatalk

[speedy100]

Case study...
What is this [Read&Write] screen exactly doing?
For example what will it do for a Corsa C ? Will it prepare a PCF7935 to start the car (cloning) or it will need further coding via OBD ?

[nicocr]

Case study...
What is this [Read&Write] screen exactly doing?
For example what will it do for a Corsa C ? Will it prepare a PCF7935 to start the car (cloning) or it will need further coding via OBD ?

hi speedy, that fuction is already in effi! look for "image generator - 40 opel"

[speedy100]

hi speedy, that function is already in effi! look for "image generator - 40 opel"

Thank You nicocr for Your reply.
My question is about the Tab (screen) -Read & Write- in EFfi. What is the function there? Is it cloning a transponder that is ready to start the car or it will need further coding via OBD and diagnostics like OpCom etc.?

[Duracell2]

Case study...
What is this [Read&Write] screen exactly doing?
For example what will it do for a Corsa C ? Will it prepare a PCF7935 to start the car (cloning) or it will need further coding via OBD ?

Preparation and cloning are 2 different things.
Preparation just writes minimum amount of data to the transponder to be validated by the car as valid transponder.
After the registration to the car, the car writes also own data to the transponder and locks it.

ZedBull can only clone few older types of transponders (I think ID13 and ID33)
For all other types of transponders , you can use ZedBull only to prepare them, and after that you have to register new transponders to the car through OBD.

The Tab "Read/Write" reads only the basic informations of the transponder. It has the same function as R button and W buttons on the real (hardware) ZedBull device.

You can use ImageGenerator for preparation of ID40, but after that it has to be registered to the car via OBD. No cloning option.

Best regards

[pablobonome]

hi guys now tried to use my Zed Bull [Zed-Q x plus] for the first time and it is not recognizing any transponder. Has anyone come across this situation. I need to know how to solve this problem. thanks guys

Sent from my SAMSUNG-SM-N910A using Tapatalk

Hello my friend, my zedbull did not work.I had to change the 7805 that powers the screen and I think it feeds the antenna too.Now works 10.
Hello my friend, my zedbull did not work.I had to change the 7805 that powers the screen and I think it feeds the antenna too.Now works 10.

[autoTkey]

You make the manual and we will give you lots of Rep and Thanks to you

[speedy100]

You make the manual and we will give you lots of Rep and Thanks to you

I would have done so but keys is not my primary activity so i have many many questions myself...

[H2Deetoo]

Did anyone ever use EFfi to write CS bytes to a prepared TP23 transponder, and successfully learn it in a Passat 3C/B6 (CCM) ?

[H2Deetoo]

Is original Zedbull software or EFfi able to overwrite transponder ID ?
I tried sending write page command directly but it didn't work. However with Vagtacho I was able to overwrite ID ..

[datapage]

Happy for the new Sierra project. congratulations.

[AutoX4242]

Hi where can i download / purchase the latest version of eefi??? and will it precode fiat 7946 remote from eeprom dump?? thankyou in advance

[TERMINATOR1000]

Hello
now we waiting Eprog.exe !
my S N : 45466649

[didi_du_93000]

Hello,

Problem with EFFI and MAZDA 2 ECU SID804.
EFFI not recognize dump.

Using TANGO and TMPRO is Ok.

[DCT748]

hello,
zed bull read the ducati key T5 id12 : C1 79 1E 00 00 00 00 60
please how to find the key logic for dash modification ?
(the key have to start with "F0 00 ....")
thanks