Zed-Bull clone - Second Life

**Agilechaveiros** · 9th December, 2020, 01:36 AM

[QUOTE = XProfig; 4013941] Olá! Tentei programar um transponder PCF7945 para meu CAS3 em um slot não usado no despejo de CAS. Carreguei o dump e selecionei PCF7942 / 44 no "assistente" de programação de teclas EFFi (PCF7945 não estava disponível). Recebi a mensagem de que a programação foi bem-definida. Mas o arquivo de resultado foi zero (eu preciso desse arquivo?).

Agora a chave não liga o carro, nem mesmo rastreia no slot da chave. Já tentei acessar a memória do PCF com o Crypto Hi / Lo da posição da chave programada, mas dá erro no transponder no EFFi (com a chave de trabalho consigo realmente ler a memória com este método).

Existe alguma chance de salvar uma chave? Por que EFFi não pode ser usado com PCF7945 para CAS3?

Muito obrigado antecipadamente por suas respostas! [/ QUOTE]

I suggest that you write the original dump file in the cas, and contact a local locksmith with tools suitable for this service

**autoTkey** · 17th April, 2019, 06:06 AM

Yes, 4D from Xhorse is most suitable for VVDI KeyTool. It doesn't work with TPX2 and I don't think it ever worked.

**Becoacamba** · 14th May, 2019, 05:26 AM

has anyone tested bmw cas (1,2,3,3+) modules?

regards

**Becoacamba** · 14th July, 2019, 05:01 PM

anybody tried this?

thanks

https://www.digital-kaos.co.uk/forums/showthread.php/759122-Mini-Zedbull-Effi-Bmw-Cas2-fail?p=3623301#post3623301

**droidwayne65** · 15th July, 2019, 02:09 AM

Originally Posted by Becoacamba

anybody tried this?

thanks

https://www.digital-kaos.co.uk/forums/showthread.php/759122-Mini-Zedbull-Effi-Bmw-Cas2-fail?p=3623301#post3623301

I've done it with CAS2 before.EFfI has a bug, where it zeroes out the data that it prompts you to save. However, there's a simple workaround for that: search the ram of "EFfI.dll", copy and paste the data to make a new file

. EFfI usually loads a copy of the original file then generates an altered one in ram. Using your file, this is what it generates when a key, IDE 7E CD 6F 97, is added as key4. Note that this is a locked key, belonging to another car, used solely for the purpose of demonstration.

**29f001** · 13th January, 2020, 09:42 PM

501/5000

Hello. I need to make a key to volvo fh13 2006 immo box 93c66. all keys lost. I use vvdi2 and super chip but car not start. vvdi gives info that it made the key but it doesn't work. The key reading in vvdi2 is id33, and in mini key toll is id44. It gives the immo box 93c66 reading. Please enter key id and file organization in key. Picture
vvdi shows 3 keys 1 and 568f9f39
2 id 56f2aa54 3 id 5661ec83
Vvdi doesn't make rewritte 93c66

**lesakljucevi** · 14th January, 2020, 03:34 PM

501/5000

Hello. I need to make a key to volvo fh13 2006 immo box 93c66. all keys lost. I use vvdi2 and super chip but car not start. vvdi gives info that it made the key but it doesn't work. The key reading in vvdi2 is id33, and in mini key toll is id44. It gives the immo box 93c66 reading. Please enter key id and file organization in key. Picture
vvdi shows 3 keys 1 and 568f9f39
2 id 56f2aa54 3 id 5661ec83
Vvdi doesn't make rewritte 93c66

Attached Files

sh13 immo box 93c66 r1ori.zip (390 Bytes, 1 views)

VVDI2 show transponder 7935,if you use VVDI SUPER CHIP,dont need rewritte 93c66 just mark used position and make dealer key

**29f001** · 14th January, 2020, 10:40 PM

356/5000

I used a new clean pcf7935AA transpoder dump looks the same as for a super chip. I will start tomorrow, the track is 20 km away.

Can you check if vvdi reads key id from immo box 93c66 correctly?
Is the dump correct?

Has anyone checked the immo off solutions for volvo fh13 2006 bosch ecu?

**29f001** · 14th January, 2020, 10:48 PM

Is the dump correct?

**CATALE14** · 6th April, 2020, 09:17 PM

5.02, alguien

hi friends i am looking for a zed bull firmware 5.02, could someone help me?thanks

**CATALE14** · 6th April, 2020, 09:16 PM

hola amigos estoy buscando un firmware 5.02 de zed bull , alguien me podria ayudar ?
gracias

**Buddy41** · 17th June, 2020, 04:10 PM

Hi,
Im learning to eeprom Honda Motorcycles.
Can anybody supply me please with some eeprom files.

Mini Zed Bull with EFFI software installed 173 modules

Many thanks & have a nice day.

**Buddy41** · 18th June, 2020, 04:07 PM

Afternoon,
Can i ask for some advice please.

After creating a new key & saving the Bin file if i then open it up i then see Kawasaki ?

The key /Bin was for Honda 93C66

**thesithlord01** · 2nd September, 2020, 08:08 PM

Hi guys, Please can someone help me on how to get the original and updated EFFI software
Thanks in anticipation of your help !

**autoTkey** · 3rd September, 2020, 06:31 AM

You need to contact Michael (Sierra) about it. Otherwise you won't be able to use it because it is protected by a paid license.
Or just download the cracked version everyone uses.