Zed-Bull clone - Second Life

[paul_12345]

@sierra why not post the code from a few modules showing the interface so those who can code could write the code for you to check/mod and add could save you a lot of time.

[3abas27]

@sierra why not post the code from a few modules showing the interface so those who can code could write the code for you to check/mod and add could save you a lot of time.

today my clone zedbull sof frimwre 5.00 with software 5.08 on EFfi for cleaning pcf 7935 work no problem but i test another used trospoder cant make clean

[verica]

try not to clean go to image generator try to prepare transporder works for me ok

[PierreTheron]

I think you need to have the original file for transponder to clear it for use in another car ..That is that you must run it through the original file you made it from .. EWS editor can do this on some transponders i found ..Then also sometimes the transponder is locked . That is without knowing where it happened bfrom ................///////////////

[frtes]

password please

[sierra]

password please

ASJjjhjhj-123gggh-kjk445

[3abas27]

ASJjjhjhj-123gggh-kjk445

thanks very well to siera and all members dk
for video post by siera for 7935 clear
we sawass word 5C 28 3F 0E 116E 28
I follow all steps on video i generate 42 from virgin 7935 i make pass all fine
i make the same for opel i generate 400 from 7935 i did the same pass word post by siera in video not work
my question how to get password for cleraing all kinds 7935

[djfelixrs]

Okay sierra!
Sent you here on a material panels fiat and got no response has been achieved or not use. How will I send you without even knowing what you need exactly? Could have at least given me an answer. If you need to send your okay as there's winhex procedure, is so to speak!!

Only one response.
Do not ask can you contribute to the project or not.
Simply, without question make a contribution

PS: At the moment I think how to make so that those who could not contribute to the project, but also wants to get the program

[3abas27]

thanks very well to siera and all members dk
for video post by siera for 7935 clear
we sawass word 5C 28 3F 0E 116E 28
I follow all steps on video i generate 42 from virgin 7935 i make pass all fine
i make the same for opel i generate 400 from 7935 i did the same pass word post by siera in video not work
my question how to get password for cleraing all kinds 7935

sorry mistake i generate 40 for opel from 7935 not 400 sorry

[williamamaro]

Sierra
I tried to program a Punto year 2008 with 95160 SSOP and has not Serto, it calculates the password Serto, plus it puts the id of the transponder in the wrong place

I sent the files to see you
programmed with SBB and copied the file
MsN: reset_decode@hotmail.com

Sierra,
Password Manderei by private message

[gepakg]

regards Gepa

ASJjjhjhj-123gggh-kjk445

[sierra]

ASJjjhjhj-123gggh-kjk445

It was a joke
I do not know what password you requested, this gave the password

my question how to get password for cleraing all kinds 7935

If you do not know how to get the password from the dump, it does not happen.

Sierra
I tried to program a Punto year 2008 with 95160 SSOP and has not Serto, it calculates the password Serto, plus it puts the id of the transponder in the wrong place

I sent the files to see you
programmed with SBB and copied the file
MsN: reset_decode@hotmail.com

Sierra,
Password Manderei by private message

I did not get the password.

[sierra]

Thank you friends for the help!!!
But I will not do this program, not interesting

[sierra]

williamamaro You sent me a draft written in Delphi?

[Elric]

williamamaro ***1101;***1090;***1086; ***1074;***1099; ***1084;***1085;***1077; ***1087;***1088;***1080;***1089;***1099;***1083;** *1072;***1083;***1080; ***1087;***1088;***1086;***1077;***1082;***1090; ***1085;***1072;***1087;***1080;***1089;***1072;** *1085;***1085;***1099;***1081; ***1085;***1072; Dalphi?

fail ya fud