Zed-Bull clone - Second Life

**nicocr** · 26th June, 2017, 02:59 PM

Originally Posted by speedy100

Case study...

What is this [Read&Write] screen exactly doing?
For example what will it do for a Corsa C ? Will it prepare a PCF7935 to start the car (cloning) or it will need further coding via OBD ?

hi speedy, that fuction is already in effi! look for "image generator - 40 opel"

**speedy100** · 27th June, 2017, 10:10 AM

Originally Posted by nicocr

hi speedy, that function is already in effi! look for "image generator - 40 opel"

Thank You nicocr for Your reply.
My question is about the Tab (screen) -Read & Write- in EFfi. What is the function there? Is it cloning a transponder that is ready to start the car or it will need further coding via OBD and diagnostics like OpCom etc.?

**speedy100** · 27th June, 2017, 10:25 AM

Originally Posted by whiskeyman

dont take this the wrong way but.....................
i can write a manual how to work spanners and there uses
but untill you get hands on and use
then you really understand its uses and what you need it for

Here is evidence that a manual is needed... read the reply this poor guy got from an idiot...
http://www.digital-kaos.co.uk/forums...rator-function

Regards

**autoTkey** · 27th June, 2017, 10:37 AM

You make the manual and we will give you lots of Rep and Thanks to you

**speedy100** · 27th June, 2017, 11:07 AM

Originally Posted by autoTkey

You make the manual and we will give you lots of Rep and Thanks to you

I would have done so but keys is not my primary activity so i have many many questions myself...

**Duracell2** · 28th June, 2017, 03:35 AM

Originally Posted by speedy100

Here is evidence that a manual is needed... read the reply this poor guy got from an idiot...
http://www.digital-kaos.co.uk/forums...rator-function

Regards

The question is from me and this guy has always the same answer "go to locksmith"
I answered now my own questions in this thread.

**Duracell2** · 28th June, 2017, 03:49 AM

Originally Posted by speedy100

Case study...

What is this [Read&Write] screen exactly doing?
For example what will it do for a Corsa C ? Will it prepare a PCF7935 to start the car (cloning) or it will need further coding via OBD ?

Preparation and cloning are 2 different things.
Preparation just writes minimum amount of data to the transponder to be validated by the car as valid transponder.
After the registration to the car, the car writes also own data to the transponder and locks it.

ZedBull can only clone few older types of transponders (I think ID13 and ID33)
For all other types of transponders , you can use ZedBull only to prepare them, and after that you have to register new transponders to the car through OBD.

The Tab "Read/Write" reads only the basic informations of the transponder. It has the same function as R button and W buttons on the real (hardware) ZedBull device.

You can use ImageGenerator for preparation of ID40, but after that it has to be registered to the car via OBD. No cloning option.

Best regards

**H2Deetoo** · 4th July, 2017, 06:32 AM

Did anyone ever use EFfi to write CS bytes to a prepared TP23 transponder, and successfully learn it in a Passat 3C/B6 (CCM) ?

**H2Deetoo** · 5th July, 2017, 06:24 AM

Is original Zedbull software or EFfi able to overwrite transponder ID ?
I tried sending write page command directly but it didn't work. However with Vagtacho I was able to overwrite ID ..

**pablobonome** · 1st August, 2017, 03:52 AM

Originally Posted by trinicolin

hi guys now tried to use my Zed Bull [Zed-Q x plus] for the first time and it is not recognizing any transponder. Has anyone come across this situation. I need to know how to solve this problem. thanks guys

Sent from my SAMSUNG-SM-N910A using Tapatalk

Hello my friend, my zedbull did not work.I had to change the 7805 that powers the screen and I think it feeds the antenna too.Now works 10.
Hello my friend, my zedbull did not work.I had to change the 7805 that powers the screen and I think it feeds the antenna too.Now works 10.

**pablobonome** · 1st August, 2017, 05:59 PM

Originally Posted by sierra

Hello.
The project will probably be revived

So far, everything is in the alpha version, I hope that 1-2 months will suffice for me to release a stable version. After that new modules will be added.

I can not often appear on the forum, but about any changes in the project will be unsubscribed.

Hello friend, where can you download this beauty? I would love to try it.