HELP TO CHANGE SERIAL AUTOCOM PLEASE

**nikinik** · 20th July, 2012, 12:55 PM

Originally Posted by Artilect

If you need just change the SN you can use this Tool. It is soft for changing VCI SN via USB. No need to desolder, flash,...

And dont forget to thank

BR

MILLION THANKS!!! JUST FOR COLLEGES THAT DONT KNOW ,WHEN
WANT TO CHANGE SERIAL DEVICE MUST BE NOT ONLY IN USB ,BUT OBD PLUG ALSO PLUGED IN WITH IGNITION ON.

**Artilect** · 9th August, 2012, 07:33 AM

Yes the VCI have to be connected to OBD, to get power supply.

BR

**ioanrokos** · 20th October, 2012, 04:35 PM

Hi all of you! Any SW for changing serial in new CDP+ of Autocom VCI?

**reyx** · 30th December, 2015, 01:47 AM

I am looking for the same thing. Is it still possible to change to the gold autocom?
Thk. I am google-ing around but very few hits.

BR

reyx

**tehnosoftex** · 30th December, 2015, 11:08 AM

No way to change serial in vci+ without changing the mcu.

**mdanilo** · 30th December, 2015, 03:51 PM

QUOTE=tehnosoftex;2673552]No way to change serial in vci+ without changing the mcu.[/QUOTE]
It's not true,Mr.Fantomel from other forum has solution,thanks him.CDP+ OTP AREA READ WITH ST-LINK.jpg CDP+ J400 TO STLINK PINOUT.JPG

**RobSSS** · 21st August, 2019, 07:46 AM

Can i change my gold autocom vci (30250) to serial 100251 si it will work with the new 2016 program?

**zoki21** · 24th August, 2019, 08:37 AM

no need to change, just install autocom 2016, at the beginning of installation just select 30250, and it will work for you, i also use gold autocom with 2016 software

**Mario6** · 24th August, 2019, 09:17 AM

I have something like that. Probably to change SN. Unfortunately I didn't try.

**electronistul21** · 30th August, 2019, 05:53 AM

I try this ,and work good and very fast ,without soldering nothing.

**jozzaholmes** · 5th September, 2019, 01:58 PM

Thanks you been searching ages!

**mejinn** · 15th January, 2022, 01:07 PM

hello, were you able to change serial? I have to change serial from 5 to 6 numbers

**crouchinggerbil** · 15th January, 2022, 01:32 PM

Originally Posted by mejinn

hello, were you able to change serial? I have to change serial from 5 to 6 numbers

You need to buy a better vci.

You can not change from 5 digit to 6 digit serial.

You can keep searching if you like but it is not going to happen.

Surely you can at least afford to buy a good tool when you get the software for nothing.

Your 2nd post in the whole 5 years that you are a member here............ wow.