Digiprog 3 clone questions and answers

**VicV** · 25th November, 2018, 09:20 PM

Hi all, I just did the mileage on a Discovery 2 with a Digiprog 3. First I did the odometer with cable 1 with success and then I tried to do the BCU with cable 35 and solderd all the wires correctly but the Digiprog doesn’t seem to connect the BCU and shows an error message “No bootmode”. I have done the odometer and BCU of another discovery 2 the same way with the same Digiprog 3 unit with success. Is it possible that my digiprog unit is broken or might it be the cable ? Please help.

**teerak2uk** · 25th November, 2018, 09:38 PM

Always possible and presume you mean Freelander 2

**VicV** · 25th November, 2018, 10:00 PM

Originally Posted by teerak2uk

Always possible and presume you mean Freelander 2

No it is a Land Rover Discovery 2 Td5

**rtbdiagnostic** · 26th November, 2018, 08:14 AM

Cas 2 should be a white box ...

**okacha** · 8th December, 2018, 06:25 PM

hi all,
digiprog is easy to use on peugeot 407 from 2004 ?

**cheero** · 8th December, 2018, 06:27 PM

beste is more hardawre
Digiprog read direct eeprom from dash and read direct eeprom from BSI
more hardware read BSI via OBD and dash direct via eeprom

**VicV** · 9th December, 2018, 12:30 AM

Hi all, I did the mileage on a Discovery 2 with a Digiprog 3. First I did the odometer with cable 1 with success and then I tried to do the BCU with cable 35 and solderd all the wires correctly but the Digiprog doesn’t seem to connect the BCU and shows an error message “No bootmode”. I have done the odometer and BCU of another discovery 2 the same way with the same Digiprog 3 unit with success. Is it possible that my digiprog unit is broken or might it be the cable ? Please help.IMG_5425.jpg

**Anachem** · 31st December, 2018, 02:01 PM

password plz

**mikkhh** · 31st December, 2018, 04:40 PM

Originally Posted by rtbdiagnostic

Cas 2 should be a white box ...

dont need to take apart car to tell, if car has blade key then cas2, if smart key then cas3, simple

**rtbdiagnostic** · 7th January, 2019, 03:58 PM

2016 ford torneo custom with nec+95320 works good with digiprog 3 - even when programming in circuit by clipping onto eeprom no hassles

**aem** · 10th January, 2019, 08:25 AM

audi Q5 2011 digi 4.94 obd read ok write ok 30 minutes

**bersch8688** · 10th January, 2019, 02:32 PM

Digiprog 4.94

Audi Q7 2014 (NOT NEW DASH)
OBD work Perfect

**triko03** · 11th January, 2019, 07:48 AM

Just completed my first Digiprog 3 odometer correction.

2006 Dodge magnum. Mission Complete.

**teerak2uk** · 11th January, 2019, 08:12 AM

Originally Posted by mikkhh

dont need to take apart car to tell, if car has blade key then cas2, if smart key then cas3, simple

So what cas would this have

**triko03** · 11th January, 2019, 08:15 AM

I did not read the rules, if i'm doing something wrong i apologize. hopefully this doesn't cause a system melt down.

Digiprog 3 v4.94 CD Data all PDF,s photos and Pin-outs are within.

https://filehost.net/819d8996c0826d22