2004 Accord. Worked. Use ST 47 cable. Accord 93c56
2004 Accord. Worked. Use ST 47 cable. Accord 93c56
ascotauto (14th June, 2019)
anytool you can recommend. These asses advertise the Nec adaptor as if it works sad sad sad
ascotauto (18th June, 2019), carradio2001 (4th September, 2019), jomberykaso (19th June, 2019)
Hi my name is Kevin. I have a digiprog 3 clone and am trying to correct the km on a 2008 Chevrolet Uplander. Can someone please help point me in the direction to change the kms. As far as I know I have to take apart cluster and connect to chip but i am not sure which one or what steps to take after that.
Thanks in advance.
Kevin
Killer76 (21st June, 2019), MasterCodein (29th September, 2019)
Thank you clusters,
So I've downloaded and read your document. I am going to try it first thing in the morning. Also I have the digiprog instructions cd but it is missing alot of vehicles (the uplander being one of them). Is there another source I can obtain instructions with a better vehicle list? I work at a shop and have alot of inquiries for this but most of the vehicles that come in are not on the list.
Thanks again
Kevin
Last edited by Kj1195; 21st June, 2019 at 05:35 AM.
FTDI Chip VS VSTM Original DIGIPROG3
What are the differences between those names ? Original VSTM is the original DIgiprog3 ?
Hi could anyone help me with instruction for correcting the mileage on a 2009 Chrysler Sebring with a digiprog3? Is it plug and play obd or will I have to do some soldering and if so to where or what chip.
Thank you
Kevin
Ford Ranger with Visteon dash HC9S12 - found this helpfull article
For km dash, you need to multiply the value to 1.609 when writing with Digiprog 3
'If I helped, please click Thanks +Reputation.. !'
jomberykaso (27th July, 2019), Killer76 (1st August, 2019)
Hi I have problem with my digiprog work ok only by obd not read eeprom and all other. I exchange 74hc125 x3 but still not work somebady has a solution ?
good day need some advice - replaced screen on a digiprog 3 and damaged multilayer ceramic capacitor see image component C71 need the value of the correct replacement i.e. datasheet parameters the temperature coefficient and voltage rating or any other way to determine the value of this multi layer ceramic capacitor suggestions be appreciated
Last edited by rtbdiagnostic; 8th July, 2019 at 02:28 PM.
'If I helped, please click Thanks +Reputation.. !'
ok away from home but son has checked scrap one i have at home for spares and he says c71 and c83 look identical if any help.
rtbdiagnostic (8th July, 2019)
Bookmarks