Digiprog 3 clone questions and answers

[ascotauto]

Hi guys
i have a Ford Bantam here for mileage with a nec on cluster. I have digiprog 3 clone and ST59 plug but it does not work, I use ford ka pinout from the manual. Is there something i am missing here or doing incorrect? Any help will be appreciated.

[Killer76]

2004 Accord. Worked. Use ST 47 cable. Accord 93c56

[cotymoto]

Hi guys
i have a Ford Bantam here for mileage with a nec on cluster. I have digiprog 3 clone and ST59 plug but it does not work, I use ford ka pinout from the manual. Is there something i am missing here or doing incorrect? Any help will be appreciated.

Not working nec with digiprog clone

Enviado desde mi SM-G950F mediante Tapatalk

[ascotauto]

anytool you can recommend. These asses advertise the Nec adaptor as if it works sad sad sad

[rtbdiagnostic]

anytool you can recommend. These asses advertise the Nec adaptor as if it works sad sad sad

this tool works good...

[Kj1195]

Hi my name is Kevin. I have a digiprog 3 clone and am trying to correct the km on a 2008 Chevrolet Uplander. Can someone please help point me in the direction to change the kms. As far as I know I have to take apart cluster and connect to chip but i am not sure which one or what steps to take after that.

Thanks in advance.
Kevin

[clusters]

Hi my name is Kevin. I have a digiprog 3 clone and am trying to correct the km on a 2008 Chevrolet Uplander. Can someone please help point me in the direction to change the kms. As far as I know I have to take apart cluster and connect to chip but i am not sure which one or what steps to take after that.

Thanks in advance.
Kevin

I just know that someone is going to steal this and use it on their sites as their own with a copyright watermark but this is my own creation.

Cheers.

[Kj1195]

Thank you clusters,

So I've downloaded and read your document. I am going to try it first thing in the morning. Also I have the digiprog instructions cd but it is missing alot of vehicles (the uplander being one of them). Is there another source I can obtain instructions with a better vehicle list? I work at a shop and have alot of inquiries for this but most of the vehicles that come in are not on the list.

Thanks again
Kevin

[Andr33iy98]

FTDI Chip VS VSTM Original DIGIPROG3

What are the differences between those names ? Original VSTM is the original DIgiprog3 ?

[Kj1195]

Hi could anyone help me with instruction for correcting the mileage on a 2009 Chrysler Sebring with a digiprog3? Is it plug and play obd or will I have to do some soldering and if so to where or what chip.

Thank you
Kevin

[rtbdiagnostic]

i did polo 2012 with digiprog. it gave error in dash.

tried to disconnect battery didn't help. (which battery-pole is best to disconnect? min or plus or both?)

then I tried xtool using the JC option (it was jc cluster). but can't connect. it dont change.



hi
not disconect! if you dash JC ! use dp3 ,put 000000,and use xtool!
regards

is this solution after showing error on dash ? or follow this steps first time arround ...

[rtbdiagnostic]

Ford Ranger with Visteon dash HC9S12 - found this helpfull article
For km dash, you need to multiply the value to 1.609 when writing with Digiprog 3

[szuwarik]

Hi I have problem with my digiprog work ok only by obd not read eeprom and all other. I exchange 74hc125 x3 but still not work somebady has a solution ?

[rtbdiagnostic]

good day need some advice - replaced screen on a digiprog 3 and damaged multilayer ceramic capacitor see image component C71 need the value of the correct replacement i.e. datasheet parameters the temperature coefficient and voltage rating or any other way to determine the value of this multi layer ceramic capacitor suggestions be appreciated

[evss]

ok away from home but son has checked scrap one i have at home for spares and he says c71 and c83 look identical if any help.