Digiprog 3 clone questions and answers

[karalada]

Skoda Octavia 1.9 TDI PD 08.2008 year

Dash~1min OK
DSG ~30sec OK
ECU~ 5min OK

[bmwparts]

hello
is there anyone who knows how to use the cable 49 for the W203 ?
thanks

Never used it either use ST60 or ST16. If using 16 disconnect battery or unplug cluster after programming. If after 01 you will also need to do EZS.

[karalada]

VW Touran 2007 1.9 TDI PD

Dash~1min OK
ECU~ 5min OK

[wadim21]

today kill dash from ford S max with big colour dysplay

[karalada]

Give more information..What exactly happened?

[justy22]

today kill dash from ford S max with big colour dysplay

does it still start and drive

[batandball]

today kill dash from ford S max with big colour dysplay

Just do the car again
On fords if for some reason the program does not finish full program then dash does not come back to life and car will not start
just start again

[antibisic]

Just do the car again
On fords if for some reason the program does not finish full program then dash does not come back to life and car will not start
just start again

It is in audi a4 Rb8 too,yesterday I kill one by simple reading and after reading I pres x to end because I just play with it.After that get L0 3 3 in the display and car not start plug vagprog and program same km all ok.I am sure digi should make too

[obdmaster]

It is in audi a4 Rb8 too,yesterday I kill one by simple reading and after reading I pres x to end because I just play with it.After that get L0 3 3 in the display and car not start plug vagprog and program same km all ok.I am sure digi should make too

Lo 3 3 is displayed when key programming.

This means there 3 keys stored and youve just put 3rd key in.

Looks like digiprog just never finished programming sequence correctly.

[mislav88]

It is in audi a4 Rb8 too,yesterday I kill one by simple reading and after reading I pres x to end because I just play with it.After that get L0 3 3 in the display and car not start plug vagprog and program same km all ok.I am sure digi should make too

why are you playing with it not reading the instructions? anyway you can simply repair LO 3 3 with digiprog

[wadim21]

always light Airbag lamp.problem solved .i have backup dump for this car.

[antibisic]

why are you playing with it not reading the instructions? anyway you can simply repair LO 3 3 with digiprog

I had backup eprom from another tool and just want to see if digiprog read corect but after reading it show erorr probable because I have not programed new km

[mislav88]

it showed error because it can read km only from decrypted eeprom, and for that it needs to set cluster in a new state, after you enter km it switches to used state again and everything works fine

[brkic6]

It is in audi a4 Rb8 too,yesterday I kill one by simple reading and after reading I pres x to end because I just play with it.After that get L0 3 3 in the display and car not start plug vagprog and program same km all ok.I am sure digi should make too

7 days ago I had 2 RB4 Audi. First went fine, second too, but after editing KM, backlight stopped to work, also RPM, shows low oli pressure, and dash not turn on when open dors. I solved it by coding, but I don't like it at all. But, beleive or not, Superprog all RBX dashes work good!
Also tried now one Fabia 2001, check written value, but nothing changed. But good thing is that works perfectly on Crypto Skoda C86.
Opa Gangnam style!

[markony79]

today kill dash from ford S max with big colour dysplay

No, you can not kill dash with OBD
this happends also with Dp3 on this car

just pull out battery and return back, everything work fine