Digiprog 3 clone questions and answers

**javyb** · 4th April, 2013, 06:01 PM

Originally Posted by autocargo

Thank you briangsm. Does digiprog working good on EZS HCS12? Have you done any? I don't remember to have seen any adapter with coaxial cable in my adapters... is there one? Is it safe on this EZS? Regards.

No digiprog doesn't work as there is no adapter in package

**bmwparts** · 4th April, 2013, 07:59 PM

Even if you have the adapter it still does not work.

**antibisic** · 4th April, 2013, 08:24 PM

Originally Posted by bmwparts

Even if you have the adapter it still does not work.

Original is also bad with ezs and cas

**davecooper47** · 5th April, 2013, 12:32 AM

I have 2 digiprogs. Both work ok for OBD but one of them will not read all eeproms. One of them is fine but the other will only read 95xxx eeproms and not 93cxx or 24cxxx. I suspect there is something wrong with the buffer chips (hc125's etc). The problem is that all of the chips have had the tops ground off so I don't know which chips to change. Can someone help me with this please.

pierre renault · 5th April, 2013, 05:40 PM

help me. digiprog 3 per OBD does not work! experienced in seat toledo 2000 not working
Information: ERROR NOT CONNECTION

Once again, sorry correction in colors and 9-pin plug
plug 9 pins
1 whit
2 green
3 red
4 orange
5 yellow
6 not connect
7 blue
8 purple
9 gray

**olegario** · 5th April, 2013, 05:58 PM

Vw Jetta 2008 : dash OBD - ok,
edc 1,9 OBD - unknown version,
DSG was 411k with reset got 514k ??? and no way to change back,
Service OBD - ok
Faults OBD - ok

**teerak2uk** · 5th April, 2013, 08:37 PM

Originally Posted by pierre renault

help me. digiprog 3 per OBD does not work! experienced in seat toledo 2000 not working
Information: ERROR NOT CONNECTION

Once again, sorry correction in colors and 9-pin plug
plug 9 pins
1 whit
2 green
3 red
4 orange
5 yellow
6 not connect
7 blue
8 purple
9 gray

Search this thread I posted pics for changing serial connection with pin numbers the 9 pin is normally where the problem is

**u.s** · 5th April, 2013, 09:47 PM

pin 9 is not connected mate ???

**teerak2uk** · 5th April, 2013, 10:20 PM

Originally Posted by u.s

pin 9 is not connected mate ???

I mean problem is normally in the 9 pin serial connection ( serial plug) not pin number 9

**teerak2uk** · 5th April, 2013, 10:42 PM

Originally Posted by pierre renault

help me. digiprog 3 per OBD does not work! experienced in seat toledo 2000 not working
Information: ERROR NOT CONNECTION

Once again, sorry correction in colors and 9-pin plug
plug 9 pins
1 whit
2 green
3 red
4 orange
5 yellow
6 not connect
7 blue
8 purple
9 gray

Do cable like I did here with new serial plug

http://www.digital-kaos.co.uk/forums...ml#post1894332

pierre renault · 5th April, 2013, 10:48 PM

I DID THE TEST WITH MULTIMETER CONTINUITY OF PIN 9, THE SOLDIERS OF WIRES AND PLUG OBD CONTINUED!
STILL THINK YOU SHOULD CHANGE THE PLUG OF 9 PIN?
I EXPERIENCED IN YEAR 2000 SEAT TOLEDO NOT WORKED, BUT NOW EXPERIENCED IN AUDI A3 2006 I WORKED WELL.
WHAT DO YOU THINK?
THANK YOU