Digiprog 3 clone questions and answers

[AlexandruP]

Your link no work, see below working one

How to solve Digiprog III Blue/White Screen problem? :

[skens]

hi
i try now,work perfekt!
regards

[g-ziro]

hi
page to help
http://obd2repair.skyrock.com/314009...n-problem.html

1 This might be solution to fix blue screen on digiwigi

Unsolder U16 and U17 from the board, and solder CY7C1049D onto the board at the same place.


regards

1- Thanks
2- link not function
3- I have test this method, nothing changed



An other idea .....


Sent from my iPhone using Tapatalk - now Free

[PremierD]

Is it A Blue/white screen when you plug ino a vehicle ? or only when powering on the bench ?

[g-ziro]

Is it A Blue/white screen when you plug ino a vehicle ? or only when powering on the bench ?

If i power on its show me bluescreen. Nothing is change with changing chip.


Sent from my iPhone using Tapatalk - now Free

[PremierD]

I meant mate .. are you using the 12volt supply ? or plugging it into a vehicle ?

[skens]

hi
MERCEDES - W203 (C) - DIAG -7_01 with ST60

1 Remove the tacho from the car
2 used ST60 as a PDF MERCEDES - W203 (C) - DIAG -7_01 , DP3 it says 49
3 adjust connector or download wrapper and connect
4 panel lights up
5 used menu w203 -7/2001
6 does not read original miles
7 Enter the desired km, work 15 min
8 back in the car, you do not need to work and box"EZS"

[Radley]

Hi somebady try Vw Crafter 2011? is chance to make ezs via DP3? Thanks in advance

[teerak2uk]

Hi somebady try Vw Crafter 2011? is chance to make ezs via DP3? Thanks in advance

I'd use a blocker personally

[teerak2uk]

Hi somebady try Vw Crafter 2011? is chance to make ezs via DP3? Thanks in advance

I'd use a blocker personally

[vageric]

I'd use a blocker personally

and witch blokker is that?

[carbandit]

blocker for a 9s12 ??? why when you can read and write with r260 /smok jtaq etc ... nec mcu is for blocker not motorola unless cas 4 secured

anyway regarding crafter you will need to do ezs with r260 or smok .. .but tacho can be done by diggiwiggi

[michalez]

it possible to copy eeprom bin from clone v4.82 to pc ? i tried to connect but without any sucess :/ Pc cant see digiprog ... any solutions?

[andersonmaxi]

hello mates
somebady try new clio 4 ??
thx u

[andersonmaxi]

hello mates
somebady try new clio 4 ??
thx u