Digiprog 3 clone questions and answers

[javyb]

Digiprog 4.88 f****d up a Audi TT 2008 today.
Did same model few months ago and work, this time it makes a black dash.

Plug digi in again and try to correct miles it should work

[nenadrossi]

Lancia Lybra 2002 , problem in mileage correction with DigiProg3 chica clone!!!
Plug 35 , soldering wires to the board ,its operating instructions digiprog3.
Blue wire remains free. Read mileage, 4 billion, 172 230 write, then read 172 230 . I was happy !
Fit them on the car, mileage 0!!
Reread 172 230, 172 452 write, then read 172 452, instead of the car, again 0!

What do I do??? please help me.

[xyznia]

if you see wrong mileage after reading ori file NEVER correct mileage,first read and save all eeprom or mcu memory with other eeprom programmer like UPA-USB, Xprog etc.... dashboard may have few different algorythms,you can lost original data after change mileage.

[gijsvm]

Plug digi in again and try to correct miles it should work

I did more than once. But nothing works anymore.
Also try with enigma tool to repair flash, nothing...
Than read out complete flash by hand with smok jtag, and send directly to smok engineer.
After that i build dash back into car and in the time i build it in smok make extra function in his xcan soft to repair this kind of TFT dash by obd.
And work !! and dash came alive !!

[wiseman]

I did more than once. But nothing works anymore.
Also try with enigma tool to repair flash, nothing...
Than read out complete flash by hand with smok jtag, and send directly to smok engineer.
After that i build dash back into car and in the time i build it in smok make extra function in his xcan soft to repair this kind of TFT dash by obd.
And work !! and dash came alive !!

When you first did this car a few month previously was it with 4.82 ?

[lupu_sandu]

Lancia Lybra 2002 , problem in mileage correction with DigiProg3 chica clone!!!
Plug 35 , soldering wires to the board ,its operating instructions digiprog3.
Blue wire remains free. Read mileage, 4 billion, 172 230 write, then read 172 230 . I was happy !
Fit them on the car, mileage 0!!
Reread 172 230, 172 452 write, then read 172 452, instead of the car, again 0!
What do I do??? please help me.

Don't try with Digiprog, will not work.
Read/write with UPA on back of dash. Works perfectly.

[gijsvm]

When you first did this car a few month previously was it with 4.82 ?

Yes was with 4.82. But also other car with other soft and other HW from dash. This one was with TFT screen.
Even after i repair flash and corrected mileaged with xcan(multiTool) i did try to read it out again with enigma, but also unknown version.
Only one that was happy was smok engineer because he add new car in his tool.

[88diablo]

Digi just done 2012 Merc W218 fine that Abrites couldnt block sync on.

[AlexandruP]

Better was to send logs to ABRITUS72 and they add to machine.

[88diablo]

Yes but I read another post that someone tried that and they got told to fit blocker still. Plus just curious to see if Digi could do it.

[PremierD]

The old wiggy can do anything .. and for a fraction of the cost .. whats not to like

[88diablo]

The old wiggy can do anything .. and for a fraction of the cost .. whats not to like

Nothing! Thats why I just liked it.

[TULGEYWOODMAN]

The old wiggy can do anything .. and for a fraction of the cost .. whats not to like

old wiggy [whigs] for prime minister.......................................... .................................................. .................................................. ...... [unless you want david cameron for first choice of course, cos he looks after you all]

[PremierD]

Wiggy would be better than the plank of ****in wood you have in there at the moment , in fact tin of chick peas would even do better , and I don't care if you're a Tory or not .

[nenadrossi]

Can the Lancia with Carprog?? Do not raise mileage with Fiat ECU scan??