Digiprog 3 clone questions and answers

[niallr]

Also can anyone tell me if v4.94 can do mk3 galaxy 05 to10 via obd?

Ok I found answer... sorry for wasting space☺

[Nymike]

Can it do 07 Chevy suburban via old?

Sent from my HTC One_M8 using Tapatalk

[clusters]

Can it do 07 Chevy suburban?

Sent from my HTC One_M8 using Tapatalk

Yes, if you disassemble dash and read 95080 using eeprom menu then calculate manually. Will not do it by OBD.

Or post dump here and someone will adjust it for you. Be sure to include Km or Mi, original mileage, desired mileage and hours.

[Nymike]

Thx. Will start working on it than.

Sent from my HTC One_M8 using Tapatalk

[Nymike]

Yes, if you disassemble dash and read 95080 using eeprom menu then calculate manually. Will not do it by OBD.

Or post dump here and someone will adjust it for you. Be sure to include Km or Mi, original mileage, desired mileage and hours.

Any chance you have pic of eprom location?

Sent from my HTC One_M8 using Tapatalk

[clusters]

Any chance you have pic of eprom location?

Eeprom circled in red, while you're there check soldering of display Mofset circled in yellow.

[Nymike]

Eeprom circled in red, while you're there check soldering of display Mofset circled in yellow.

Any chance for dash power up pins? I know iam asking a lot but still learning.

Sent from my HTC One_M8 using Tapatalk

[clusters]

Please learn how to use search functions, it has been posted before.

http://www.digital-kaos.co.uk/forums...=1#post1679330

Any more questions about this please start your own thread.

[prahlad14]

hi does someone have dump for airbag continental 38910-61p10

[DashProg]

hi does someone have dump for airbag continental 38910-61p10

Mate please move to airbag section you will get answer for your question

Sent from my ASUS_T00J using Tapatalk

[driftaren]

Hi
i have a audi s8 year model 2008 and i want to know if the digiprog 3 working for the car and can change the mileage?

[vageric]

Hi
i have a audi s8 year model 2008 and i want to know if the digiprog 3 working for the car and can change the mileage?

on post #5264 you have ask the same question!

[dashradio]

on post #5264 you have ask the same question!

Because that is easier than plugging in and trying it !!!

[ibratex]

hello i saw this post somwhere i am sharing to ask if someone made these steps with digiprog on anyof E71 first generation x6 2008-2012 ????


Newly launched V4.94 Digiprog 3 makes Digiprog 3 become the hot topic among many car enthusiasts, while what I want to share with you is “How to Adjust Mileage for BMW E71 with Digiprog 3”.
Take my BMW E71 as an example; you can follow the steps below to adjust the mileage.
1.Remove the instrument cluster and program of this gem.
2. Place the READY PROGRAMMED instrument cluster in range, for example, on the passenger seat, but do not connect it to CAS programming!
3. The diagnostic port is located in the driver’s footwall. Turn the ignition on a vehicle. Connect connector ST16 the diagnostic port and the DIGIPROG.
4. Select the program: cars / trucks – BMW – 6 Series (E71) – CAS 3 DIAG.
The DIGIPROG displays the old / wrong Mileage.
5. Now you just confirm with the hook. (Note: Please Do Not enter new value)
Pay attention to the display from Digiprog. If the message appears: IKE INSTALLATION must be installed within 60 seconds, the IKE (instrument cluster) or connect to the vehicle. Now a timer is running from (110-0).
6. The instrument cluster now shows the new / correct KM – to stand.

[bersch8688]

Digiprog v4.94

BMW E46 2004 ---> 35080 Clip Work
Ford Fiesta HCS12 ---> ST48 Work
Seat MII 2013 ---> OBD Work