Digiprog 3 clone questions and answers

[AudiS4]

2014 VW touraeg will not go via obdII. Will read dash and correct mileage however 7F error displayed on dp3 clone. Any ideas??



Sent from my iPhone using Tapatalk

[teerak2uk]

2014 VW touraeg will not go via obdII. Will read dash and correct mileage however 7F error displayed on dp3 clone. Any ideas??



Sent from my iPhone using Tapatalk

Of course it won't buy a better tool

[Rglisse]

Digiprog 3
Audi sq5 2014 OBD Ok 30 min job
Seat Léon 2008 OBD Ok
Golf 6 OBD Ok
Mercedes w204 OBD Ok + mb can filter

Land Discovery 3 st 01 no work

Advice for digiprog change st01 for 3m soick quality and scrubs soick eeprom

[autocheck]

Honda freed 2008 with eeprom S93c76 56123km File request. mine not showing mileage

Sent from my SM-A605FN using Tapatalk

[rtbdiagnostic]

2011 Audi S3 dash via OBD2 anybody can share experience with Digiprog

[catalinosonesti]

hi
do not try ,dash is secure .
http://www.codecard.eu/carprog/softw.../prod_772.html
best regrads

[Music73]

2011 Audi S3 dash via OBD2 anybody can share experience with Digiprog

Did a standard a3 one of these and and it locked up in service mode, was a little scary.. but it did come back after going through it again.. but definitely had me touching cloth..


Sent from my iPhone using Tapatalk Pro

[rtbdiagnostic]

Hi I do them audi,s with clone digiprog 3 v4.94
Read and change km on of the ignition few times then cluster dies. Unplug take out key and restart procedure from beginning. Ign on plug in redo km reads 0km enter new km u want and bam cluster activates again and changes to the new desired km ignition on off as tool says and that's it. I've done plenty of them specially 2007 to 2010 a3audi,s could be 11 as well. Never had one issue doing it that way.

As tested by one of our members

https://www.digital-kaos.co.uk/forums/showthread.php/483974-Audi-A3-2007-micronas-CDC3217G?p=2762492&viewfull=1#post2762492

[westlo]

2010 mercedes c class w204 select EZS , took 30secs mileage stuck but have to reset DPF or limp mode after a few miles

2010 touran highline clocks 30seconds no issues

2010 ford kuga need to clear a lot of DTCs though after correction

seat ibiza 2010 no problem

2006 , 2008 , audi a3 no problems

2010 audi a3 first change went to 0 miles , second try was fine

insignia 2009 no problems 30seconds

2007 fiesta 30 seconds no problems

2010 t5 vw transporter no problems

2011 caddy no problem

VW UP could not do
2010 insignia could not do but obdprog m500 doctor did no problem

[ikara]

2011 Audi S3 dash via OBD2 anybody can share experience with Digiprog

i killed one dash,blocked in boot mode,repair it with smok by obd,dash was dead,no ignition,and not start car,

[Kimoo2000k]

Hello all,
How are you all.
I want to correct mileage for jeep liberty kk 2009.
How i can do it by digiprog 3??
Thanks in advance

[AudiS4]

Anyone know if digiprog clone will do 2000 audi TT via obd?? I have new replacement cluster and odis did not convert km to miles. Wrote too high a mileage. Wondering if Digiprog can save my ass.


KOMBI+WEGFAHRS. M73 D56 DASH

[cotymoto]

Anyone know if digiprog clone will do 2000 audi TT via obd?? I have new replacement cluster and odis did not convert km to miles. Wrote too high a mileage. Wondering if Digiprog can save my ass.


KOMBI+WEGFAHRS. M73 D56 DASH

No

Enviado desde mi SM-G973F mediante Tapatalk

[AudiS4]

No

Enviado desde mi SM-G973F mediante Tapatalk

Have you tested or tried ??


Sent from my iPhone using Tapatalk

[Joeyfast13]

Anyone got digiprog to work on 2006 ford mustang cluster. I tried swapping power and ground on my connector. Still cant get it to read.