Carprog Mcu Reflash Step by step

**rybenz** · 18th November, 2019, 01:42 PM

Originally Posted by Stelaras26

Same as any jlink mate!

Ahh OK thanks Mate.

**shgatev** · 18th February, 2020, 07:03 AM

Hi, can anyone share a good flash 8.21 and .lib file
Thanks

**Domi** · 18th February, 2020, 05:03 PM

Somebody tested on laguna 2 card programing ?

**Olsak** · 16th April, 2021, 03:51 PM

Je opravdu potřeba zvednout kolík 55 z MCU? dík

J-link nemůže najít Sam7S256
Velmi obtížné zvednout kolík 55
pravděpodobně špatně smazáno mcu

Problem error
tck(pin 9)low but should be high please check the hardware

**TTR** · 20th April, 2021, 02:33 PM

Hello mates
I Lost my AT88SC

(guys dont laugh ;-))
i ordert a new one ,has anybody the Dump for it

Thanks to all

grettings TTR

**adelnooh** · 28th May, 2021, 08:33 PM

refer to post 599

**Domi** · 10th July, 2021, 07:21 PM

Hi, has somebody list of components? For main PCB

**spantor** · 19th December, 2021, 01:29 PM

Hello.

I have done all the procedures for reflash at91sam7s256. Find a nice .bin file (I think 8.21) and install it with jtag. Now I open software 10.93 and many things have been unlocked but when I run something it always shows error "file **********. Lib not found" Don't install any .lib file because I don't know the procedure. If someone can guide me in solving the problem I would be very grateful.

**brchip** · 20th December, 2021, 04:42 PM

Originally Posted by spantor

Hello.

I have done all the procedures for reflash at91sam7s256. Find a nice .bin file (I think 8.21) and install it with jtag. Now I open software 10.93 and many things have been unlocked but when I run something it always shows error "file **********. Lib not found" Don't install any .lib file because I don't know the procedure. If someone can guide me in solving the problem I would be very grateful.

Did you save the LIB file into the software file? Just copy or save it into the software file and it should work fine.

**mrchip** · 23rd March, 2022, 02:43 AM

hi I need an good and latest flash file for at91sam7s256 ( clone), I have now 8.21 but with counter

**mrchip** · 23rd March, 2022, 09:30 PM

up up ..can someone me help please ?

**Rider667** · 24th March, 2022, 08:27 AM

all info that you need is here https://www.digital-kaos.co.uk/forum...ything-Carprog

Originally Posted by mrchip

hi I need an good and latest flash file for at91sam7s256 ( clone), I have now 8.21 but with counter

**lucas39** · 29th November, 2022, 02:34 PM

Good day.
I have 2 Carprog 8.21 clone. One has damaged AT88 and I wanted to convert it to ONLINE.
I uploaded FW ONLINE to it, but the PC does not recognize it.
Is there a "step by step how to do it online" anywhere?
do I need to have something else besides FW in ARM7?

**Rider667** · 1st December, 2022, 09:46 PM

carprog clones not go online..only tells that is connecting to server insted is searching in a folder in your computer(some vws file)...

Best regards

Originally Posted by lucas39

Good day.
I have 2 Carprog 8.21 clone. One has damaged AT88 and I wanted to convert it to ONLINE.
I uploaded FW ONLINE to it, but the PC does not recognize it.
Is there a "step by step how to do it online" anywhere?
do I need to have something else besides FW in ARM7?

**roybws** · 3rd December, 2022, 10:21 AM

My advice for all:

Don’t use the flat cable that comes with jlink. Connect directly to the jlink pins and use cables as short as possible.

I had a lot of problems and connection errors until i’ve made shorter cables (3-4cm max). Also connect the 3.3v pin and usb to carprog for more stable power supply.

This is what worked for me and now i have 13.77 fw working great.

Thread: Carprog Mcu Reflash Step by step

Thread Tools

Display

carprog reflash problem with .lib not found

Bookmarks

Bookmarks

Posting Permissions