Hi, can anyone share a good flash 8.21 and .lib file
Thanks
Hi, can anyone share a good flash 8.21 and .lib file
Thanks
Somebody tested on laguna 2 card programing ?
Keep in mind, English is not my native language.
Je opravdu potřeba zvednout kolík 55 z MCU? dík
J-link nemůže najít Sam7S256
Velmi obtížné zvednout kolík 55
pravděpodobně špatně smazáno mcu
Problem error
tck(pin 9)low but should be high please check the hardware
Last edited by Olsak; 16th April, 2021 at 03:55 PM.
Hello mates
I Lost my AT88SC (guys dont laugh ;-))
i ordert a new one ,has anybody the Dump for it
Thanks to all
grettings TTR
refer to post 599
Hi, has somebody list of components? For main PCB
Keep in mind, English is not my native language.
Hello.
I have done all the procedures for reflash at91sam7s256. Find a nice .bin file (I think 8.21) and install it with jtag. Now I open software 10.93 and many things have been unlocked but when I run something it always shows error "file **********. Lib not found" Don't install any .lib file because I don't know the procedure. If someone can guide me in solving the problem I would be very grateful.
hi I need an good and latest flash file for at91sam7s256 ( clone), I have now 8.21 but with counter
up up ..can someone me help please ?
all info that you need is here https://www.digital-kaos.co.uk/forum...ything-Carprog
Good day.
I have 2 Carprog 8.21 clone. One has damaged AT88 and I wanted to convert it to ONLINE.
I uploaded FW ONLINE to it, but the PC does not recognize it.
Is there a "step by step how to do it online" anywhere?
do I need to have something else besides FW in ARM7?
My advice for all:
Don’t use the flat cable that comes with jlink. Connect directly to the jlink pins and use cables as short as possible.
I had a lot of problems and connection errors until i’ve made shorter cables (3-4cm max). Also connect the 3.3v pin and usb to carprog for more stable power supply.
This is what worked for me and now i have 13.77 fw working great.
Bookmarks