Launch X431 INFO AND HELP SECTION

**smirnoff_rules** · 11th September, 2012, 02:54 PM

thought this might be a good place to start a thread for others that need help and info on there LAUNCH units ie setup , using adaption codes , if and when new updates are available , cars its not working on and so on ,

NO TALK ON FAKES OR FAKE SOFTWARE PLEASE

**demodamota** · 13th September, 2012, 12:33 AM

hello , I have a original launch mini "PDA" and works perfect at 10 days ago

. The SD card have lost all the information and now I cant do anyting

My last update are from 2008 .Someone can tell me please if possible repair the SD card or I need to buy new one ?
tks in advance

**smirnoff_rules** · 13th September, 2012, 08:59 AM

when you put the sd card in a pc does it say the card needs formating ? if it does it sounds like its corrupted and the software might be there ? there are programes on the net that can remover deleted stuff of a card , might be worth a hunt around ..http://pcsupport.about.com/od/filere...y-programs.htm

:~)always copy your sd card to pc as a backup after any update

**Tachotony** · 13th September, 2012, 04:02 PM

Hi Smirnoff
I have an problem with 2 X431 the are very very slow after update send from china somebody an suggestion
the last other I did tel me ::
Reset smartbox OK
Checking smartbox Succes
Download program Failure

some suggestions are welcome thanks in advance

regards T

**liber** · 24th September, 2012, 05:10 AM

Originally Posted by Tachotony

Hi Smirnoff
I have an problem with 2 X431 the are very very slow after update send from china somebody an suggestion
the last other I did tel me ::
Reset smartbox OK
Checking smartbox Succes
Download program Failure

some suggestions are welcome thanks in advance

regards T

sorted out?

**carmanscan** · 18th September, 2012, 01:42 AM

intall any cd card!!!

**salahmanu** · 7th December, 2012, 02:10 PM

Hi please i have a probmlem with my lanch i can't accees to the
bluetooth connection or cable when i click on bluetooth or cable he gives me this message
the application has performed an illegal operation and will be stoped.if the problem persists contact the program vendor

Program: Diagunshow.exe
Exception : 0x0000005
Adress: 56004F00

I really need u'r help and thx in advance

**liber** · 11th January, 2013, 09:32 AM

Originally Posted by salahmanu

Hi please i have a probmlem with my lanch i can't accees to the
bluetooth connection or cable when i click on bluetooth or cable he gives me this message
the application has performed an illegal operation and will be stoped.if the problem persists contact the program vendor

Program: Diagunshow.exe
Exception : 0x0000005
Adress: 56004F00

I really need u'r help and thx in advance

Will you backup your card and format the card and drag the file back to the card again and then test it?

if it still can't sorted out,you may have to contact your supplier

**matias** · 9th January, 2013, 11:26 AM

Hello all,
I bought Diagun before any time. All works good, but how or where I find if is clone, or ori?
Is any database?
And where I find username and password for login to X431 sites?
Many thx
Matias

**liber** · 11th January, 2013, 09:34 AM

Originally Posted by matias

Hello all,
I bought Diagun before any time. All works good, but how or where I find if is clone, or ori?
Is any database?
And where I find username and password for login to X431 sites?
Many thx
Matias

the simplest way is to see your manual,if the manual language in Chinese,that would be 100% clone.haha...

**salahmanu** · 14th January, 2013, 04:53 PM

Hi i have a problem in the screen of my launch x431;however i calibrated it in the start the problem persist it start very well in the begening but after a while the problem appears and i can't work with the stylo or the pen i must keep the click on something for a while to chose please any idea or help please

**vicaro** · 21st April, 2014, 05:50 PM

KINDLY LOOKING FOR HELP TRY TO TROUBLESHOOTING PROBLEM WHIT MY X431 TOOL
the machine works in almost all the brand, the only one that can not connect seems mercedes specially older 38 pins , and when connected besides error communication , is produce lots malfunctioning in the especially in the traction control , is erase the codes in all the units end generate communication problems between modules , can really verified because do not have another scanner capable but after try to communicate the BAS light indicate malfunctioning and than goes way , any idea . is the smart box , the 38pin or software> any input is appreciate , thanks

**NZBrakelathes** · 29th April, 2014, 01:23 AM

Originally Posted by vicaro

KINDLY LOOKING FOR HELP TRY TO TROUBLESHOOTING PROBLEM WHIT MY X431 TOOL
the machine works in almost all the brand, the only one that can not connect seems mercedes specially older 38 pins , and when connected besides error communication , is produce lots malfunctioning in the especially in the traction control , is erase the codes in all the units end generate communication problems between modules , can really verified because do not have another scanner capable but after try to communicate the BAS light indicate malfunctioning and than goes way , any idea . is the smart box , the 38pin or software> any input is appreciate , thanks

Is your unit a true Launch or Copy?

Sent from my iPhone using Tapatalk

**fahmidhassan** · 12th July, 2016, 07:59 AM

Hi I have a launch x431 v+ and it works well
But it can't do any coding on ssangyong
It reads and erases Dtc well.when I go to injector coding it seems like coding but nothing changed....thanks for the thread.