Quote Originally Posted by davohammer View Post
I am totally new to all this stuff and im trying to do exactly the same thing. I have a Skybox F3 currently setup for Sky UK which is the only satellite that shows up in the satellite list following the firmware update. I have a Non motorised dish so i have fitted a second LNB to my current static dish and pointed it to 19.2E to hopefully pick up Astra 1. Are there any config files around that have the European satellites on them that i can simply upload to the Skybox to add them or do i have to add the satellites manually ? If i have to add them manually what settings etc do i need for LNB Frequency etc ? I have read some posts that say to set it to Universal however when setting up the satellite manually Universal isnt an option it just says 3620, 5150 or 5750.

Any help would be greatrly appreciated !
1. You need to manually enter 19.2e as a new satellist in the list menu, its easy, just use teh remote to enter the 19.2e, then on LNB frequency press ok, this will give you a dropdown menu, select the universal range to match you LNB, or just the same as the freqency for 28.2e sat settings.

2. To operate two LNB's you need a disseqc switch 1.0/1.1 or 1.2, any version will work fine.