Technomate Loaders

**mog001** · 10th March, 2011, 02:30 PM

Will the 3000 series work on 3000 D

**panos84** · 24th March, 2011, 06:25 PM

hi guys,
i'm glad this post is active because support for older technomate products is rare.. keep up the good work ;-)

**hkhksh** · 27th March, 2011, 07:10 PM

Originally Posted by dick b

you have asked in the wrong section but go to Download center

Hi all i have a Tm-5400 ci+usb which one do i choose in the download section ??

**dick b** · 28th March, 2011, 11:34 AM

Originally Posted by hkhksh

Hi all i have a Tm-5400 ci+usb which one do i choose in the download section ??

in the left hand column choose either tm 5000 super or tm 5000 non super(depending on your box) then click on the top line and then the 2nd line. you want patch 147p for the super or patch 185p for the non super.DO NOT load a patch that is not for your specific box.

**blip1959** · 5th April, 2011, 08:06 PM

i want to thank you all for the codes so i can watch my sat.. you guys are the best. sergio out. if only it can be sent in mail i would pay for that .

**softmint3812** · 15th April, 2011, 02:02 PM

hi new here was wondering if there is any patches for the 3500 as iv had the job of installing it for a freind and cant seem to access all of the channels, had to tune it in the hard way with no meter but am reciving some channels around 30 but cant seem to find anymore have tried tuneing in the rec but no more seem to be found any help would be much appreciated

regards chris

**dick b** · 15th April, 2011, 04:30 PM

go to www.download.for-better/biz/main.php for patches but I dont think you will be able to open anything on turksat but you should get over 140 FTA channels on 42E.did you put enough skew on the lnb?

**comboo** · 30th April, 2011, 09:13 PM

HI MATE I NEED YOUR HELP WITH MY TM500 SERIES What do i need to download if you could help it would be great thanks please step by step as aim new to this

**comboo** · 5th May, 2011, 10:36 AM

hi benney iam new on this but was hopping if you could help me as you have others my problem is i have a tm500 for about 8 weeks now and have done alot of reading on this box but there is no step by step giud now i have mannege to get the (TM control center) and the (Dream control center) and of cuz the (14U-R image) for the box now i know i need to flash the box then the network part i believe but to frank i do not no were to start on how to flash and then the rest please please could you help me and not to forget i also have my C-lines ready i will apriate it if you could help alote of members are directing me to you as you are good with this thanks in advance mate sorry if it is two much info on your private as i can't rech you so tot i tryed this way thanks