407 HDI 1.6 DPF OFF 2006MY

[mario38]

I think that the files that you have tried are not good if you want to test my

[Johnnyrb5]

Mario38
I wrote your file
Recoded injectors and configuration for engine ecu
cleared faults
Went to BSI config and changed fuel to diesel without filter as I missed this before. cecked cust options petrol or diesel engine without filter. checked ecus present no additive ecu.
started fine no errors turned off found only errors as before
took for test drive ok for 10 minutes then depollution system faulty.
read codes now has additional code for turbo pressure to high. Would this cause the depollution error also?
J5

[ZIZZOU]

last week,i have donne chiptuning foe 207 1.6hdi from 110cv to 150cv with succes,cleint was very very happy
do you want to see your car fly johny?

[mario38]

Mario38
I wrote your file
Recoded injectors and configuration for engine ecu
cleared faults
Went to BSI config and changed fuel to diesel without filter as I missed this before. cecked cust options petrol or diesel engine without filter. checked ecus present no additive ecu.
started fine no errors turned off found only errors as before
took for test drive ok for 10 minutes then depollution system faulty.
read codes now has additional code for turbo pressure to high. Would this cause the depollution error also?
J5

this is strange I have other cars and 100% ok .. maybe your problem is writing file .. I advise you to bdm use

if you remember a thank you about the same

[Johnnyrb5]

Hi Mario,
yes I thought also I am using Galeto cable and software called "New Serial 1260" to write/read file.
Can you advise how to get BDM?
Thanks
J5

[kennfeld]

Hi Mario,
yes I thought also I am using Galeto cable and software called "New Serial 1260" to write/read file.
Can you advise how to get BDM?
Thanks
J5

your tool not read and recode the injectors ....
best is do it bdm if you have no good obd tool
i do them cmdflash never injector code lost ...