try this and report
Hi Everybody,
Can someone please help me remove DPF from this ECU manually.
I have tried incorrectly with ECUSAFE and all looked fine but car will not rev above 3000rpm no DTC in pp2000.
Many Thanks
J5
PS I removed dpf in pp2000 cust options and changed additive ECU to absent
Last edited by Johnnyrb5; 22nd November, 2012 at 02:53 AM. Reason: Missing info
Thank you zizzou will; try later today.
Is this a manual edit?
Thanks
should be single switch solution.
hey G you still around? I though you are not around anymore?
let's tray,and repport for result johny
Hi I wrote file and Engine ECU lost configuration and I have lost all injector codings.
I have added the settings best I can but some I am not sure of especially gearbox type and alternator class and body configuration can someone advise? I have to enter the codes for the injectors. Is cylinder 1 near the timing belt or the gearbox on this car? There also errors relating to FAP still. Car starts but only revs to 3000 rpm and dispalys engine management system faulty.
Pleaase help
J5
Additional photo
hi
first,recode injectors,Ist cylinder 1 near the gearbox
mr G brings bad luck )
what is the number for the ecu
Sorry for my English.
GG 5268481
We are here to help each other unselfishly
try this files first chec 407 1.6 fap off cheksum moj
Sorry for my English.
GG 5268481
We are here to help each other unselfishly
your file won't do any good. he lost car configuration and car must be recoded.
in 1.6HDI engine,i recode injectors in 10 minutes
Last edited by ZIZZOU; 23rd November, 2012 at 11:18 AM.
Thank you for your help.
Recoded injectors car running normally now
Car only has these errors. I told ecu I had topped up the additive level & replaced DPF, Can I remove connection to tank or just ignore as all seems fine now?
Engine ECU
Additive system Value received by CAN Incorrect
Additive system Quantity of additive to high
Additive system Fuel tank cap sensor
Additive system * Critical level of additive in the resovoir
Bookmarks