VP44 IDS Procedure programming

[wwa]

Hello,

I search procedure programing for VP44, maybe someone have ?
Thanks in advance.

[nesmark]

Hi,
i think that is possible only in service centre

[3in1san]

Hi
You need IDS ford.

[morito]

and which is Procedure programming ???????

[zoro1]

What do you whant to do?put secon hand pump in car?
there is option in menu ,mast find outcode,then calculate incode and write with IDS in pump/all thi tru obd/
if you hawe a brand new pump with module -only bosch 815 can program pump ecu/psg5 /.The psg5 is OTP.

[wwa]

Car is Ford Transit 2001, and I need only change the ECU from VP44.
I have used ECU from another car. I also have IDS Ford. I want to know if I can add a used ECU to another car. I also have a calculator INCODE-OUTCODE

[joemajdalani]

No need for incode on 2001 model & yes you can use used parts.

[cezarycezary8]

if you have Bosh KTS it's easy and don't need in code

[morito]

kts works ok in this pumps

regards

[ciptel07]

hello, you must to select car- --module programing--security---select PCM--- match new module-select new FIP.

[zoro1]

The ECU mast be from the same car!I mean engine the same and main ECU the same brand and model!You can not put ECM from 1.9L engine to 2.0L engine .

[nabilrifi]

pleas name of cable or refrance used with kts

if you have Bosh KTS it's easy and don't need in code

[zoro1]

Make it your own!Conect K-lines ,CAN lines and power,two cables for power and you are rich with 200 EURO....And bosch poor -200Euro.

[nabilrifi]

can you give pinout pleas

[zoro1]

for PSG 5 ,for OBD 2 see link.
http://www.obdstore.com/wp-content/u...ble_pinout.png