xprog repair i need tested file ,atmel64 and other

**javilette** · 27th November, 2012, 05:02 PM

hi i have problem whith x-prog i need tested files of atmega and the other if is necesary too whith sw please for v 5.0 , i have this problem when i push update say to me "device is silent" usb works i think , the sw conect when i enter de wire of the usb and to change the undefinide to usb com port 3 ,i try many dump for atmel but i dont khow if necesary to put the 93c46 too and dont works anyfile,

**adam28** · 29th November, 2012, 09:02 PM

Hi mate

Did you solve your problem? did you try to write 93C46.

Cheers

**gadroulll** · 29th November, 2012, 09:20 PM

use a pc with a good supply in current in usb .
unistall the driver and install it again .
if not works use a old version of xprog softawe and make update.

**javilette** · 29th November, 2012, 10:34 PM

no i dont solve the problem tomorow i recived one xprog of my friens i will read the atmel flash and eprom and 93c46 and and try i have 3 x prog whith this problem , i have to repair can you help me adam28

**lago12** · 30th November, 2012, 01:09 AM

Hello
This is what you need him

**adam28** · 30th November, 2012, 08:26 AM

Did you erase atmega64 before you programmed?

**adam28** · 30th November, 2012, 11:25 AM

Load Flash, Eeprom and cfg into your xprog5.0 software which is inside a folder in the rar

Have +12 in socket of xprog you are programming like in picture.

Do not read Atmega just Erase it. If you do read just reload the project.

Then write project to your Atmega64

Works for me everytime.

No need program 94c46

**javilette** · 30th November, 2012, 11:33 AM

i write whith upa because i dont eraser but i write and verifiquy ok ,can be this the problem , i think the files is worng the flash and the eprom of atmega the xprog i have broken i can try wihth the x prog of my friens i recived today. is this for version 5 , thank you i post result

**adam28** · 30th November, 2012, 11:48 AM

use xprog to xprog for programming. These files work everytime for me with full Auth. You need to erase first.
Follow instructions with your friends xprog. I dont use UPA for this project.

Yes with ver5.0 Use quality USB cable, not china sh!t which is about 3 miles long

**adam28** · 1st December, 2012, 05:59 PM

Originally Posted by javilette

i write whith upa because i dont eraser but i write and verifiquy ok ,can be this the problem , i think the files is worng the flash and the eprom of atmega the xprog i have broken i can try wihth the x prog of my friens i recived today. is this for version 5 , thank you i post result

All ok now mate?

**PANFUTY** · 1st December, 2012, 10:04 PM

Sometime this problem can be in Atmega64(can be damaged some ports). It will flashing, verified - but dont work. Try to change Atmega.

**smayer** · 2nd December, 2012, 01:02 AM

Tested files for xprog

**adam28** · 2nd December, 2012, 10:10 AM

Already posted tested files mate,and if they dont work he has other problem.

**javilette** · 2nd December, 2012, 05:51 PM

hi adams i have problem whith your projects i can write the files of smayer but dont works when i put your project i can eraser the atmel but when i pust to write i have this.

**adam28** · 2nd December, 2012, 09:07 PM

Originally Posted by javilette

hi adams i have problem whith your projects i can write the files of smayer but dont works when i put your project i can eraser the atmel but when i pust to write i have this.

It wont find path as the path is my desktop

just load manually

Here

rar in post7 edited. Added more info